Skip to content

GitLab

H
HUTP
Commit 61b62b1f authored by ywj's avatar ywj
Browse files
Options

add new ip and readme

parent a47f2e6a
Show whitespace changes
Inline Side-by-side
Showing with 2801 additions and 0 deletions
FPGA/ip_repo/axi_lite_para24_1_0/bd/bd.tcl 0 → 100644
View file @ 61b62b1f
proc init { cellpath otherInfo } {
set cell_handle [get_bd_cells $cellpath]
set all_busif [get_bd_intf_pins $cellpath/*]
set axi_standard_param_list [list ID_WIDTH AWUSER_WIDTH ARUSER_WIDTH WUSER_WIDTH RUSER_WIDTH BUSER_WIDTH]
set full_sbusif_list [list ]
foreach busif $all_busif {
if { [string equal -nocase [get_property MODE $busif] "slave"] == 1 } {
set busif_param_list [list]
set busif_name [get_property NAME $busif]
if { [lsearch -exact -nocase $full_sbusif_list $busif_name ] == -1 } {
continue
}
foreach tparam $axi_standard_param_list {
lappend busif_param_list "C_${busif_name}_${tparam}"
}
bd::mark_propagate_only $cell_handle $busif_param_list
}
}
}
proc pre_propagate {cellpath otherInfo } {
set cell_handle [get_bd_cells $cellpath]
set all_busif [get_bd_intf_pins $cellpath/*]
set axi_standard_param_list [list ID_WIDTH AWUSER_WIDTH ARUSER_WIDTH WUSER_WIDTH RUSER_WIDTH BUSER_WIDTH]
foreach busif $all_busif {
if { [string equal -nocase [get_property CONFIG.PROTOCOL $busif] "AXI4"] != 1 } {
continue
}
if { [string equal -nocase [get_property MODE $busif] "master"] != 1 } {
continue
}
set busif_name [get_property NAME $busif]
foreach tparam $axi_standard_param_list {
set busif_param_name "C_${busif_name}_${tparam}"
set val_on_cell_intf_pin [get_property CONFIG.${tparam} $busif]
set val_on_cell [get_property CONFIG.${busif_param_name} $cell_handle]
if { [string equal -nocase $val_on_cell_intf_pin $val_on_cell] != 1 } {
if { $val_on_cell != "" } {
set_property CONFIG.${tparam} $val_on_cell $busif
}
}
}
}
}
proc propagate {cellpath otherInfo } {
set cell_handle [get_bd_cells $cellpath]
set all_busif [get_bd_intf_pins $cellpath/*]
set axi_standard_param_list [list ID_WIDTH AWUSER_WIDTH ARUSER_WIDTH WUSER_WIDTH RUSER_WIDTH BUSER_WIDTH]
foreach busif $all_busif {
if { [string equal -nocase [get_property CONFIG.PROTOCOL $busif] "AXI4"] != 1 } {
continue
}
if { [string equal -nocase [get_property MODE $busif] "slave"] != 1 } {
continue
}
set busif_name [get_property NAME $busif]
foreach tparam $axi_standard_param_list {
set busif_param_name "C_${busif_name}_${tparam}"
set val_on_cell_intf_pin [get_property CONFIG.${tparam} $busif]
set val_on_cell [get_property CONFIG.${busif_param_name} $cell_handle]
if { [string equal -nocase $val_on_cell_intf_pin $val_on_cell] != 1 } {
#override property of bd_interface_net to bd_cell -- only for slaves. May check for supported values..
if { $val_on_cell_intf_pin != "" } {
set_property CONFIG.${busif_param_name} $val_on_cell_intf_pin $cell_handle
}
}
}
}
}
FPGA/ip_repo/axi_lite_para24_1_0/component.xml 0 → 100644
View file @ 61b62b1f
<?xml version="1.0" encoding="UTF-8"?>
<spirit:component xmlns:xilinx="http://www.xilinx.com" xmlns:spirit="http://www.spiritconsortium.org/XMLSchema/SPIRIT/1685-2009" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<spirit:vendor>xilinx.com</spirit:vendor>
<spirit:library>user</spirit:library>
<spirit:name>axi_lite_para24</spirit:name>
<spirit:version>1.0</spirit:version>
<spirit:busInterfaces>
<spirit:busInterface>
<spirit:name>S00_AXI</spirit:name>
<spirit:busType spirit:vendor="xilinx.com" spirit:library="interface" spirit:name="aximm" spirit:version="1.0"/>
<spirit:abstractionType spirit:vendor="xilinx.com" spirit:library="interface" spirit:name="aximm_rtl" spirit:version="1.0"/>
<spirit:slave>
<spirit:memoryMapRef spirit:memoryMapRef="S00_AXI"/>
</spirit:slave>
<spirit:portMaps>
<spirit:portMap>
<spirit:logicalPort>
<spirit:name>AWADDR</spirit:name>
</spirit:logicalPort>
<spirit:physicalPort>
<spirit:name>s00_axi_awaddr</spirit:name>
</spirit:physicalPort>
</spirit:portMap>
<spirit:portMap>
<spirit:logicalPort>
<spirit:name>AWPROT</spirit:name>
</spirit:logicalPort>
<spirit:physicalPort>
<spirit:name>s00_axi_awprot</spirit:name>
</spirit:physicalPort>
</spirit:portMap>
<spirit:portMap>
<spirit:logicalPort>
<spirit:name>AWVALID</spirit:name>
</spirit:logicalPort>
<spirit:physicalPort>
<spirit:name>s00_axi_awvalid</spirit:name>
</spirit:physicalPort>
</spirit:portMap>
<spirit:portMap>
<spirit:logicalPort>
<spirit:name>AWREADY</spirit:name>
</spirit:logicalPort>
<spirit:physicalPort>
<spirit:name>s00_axi_awready</spirit:name>
</spirit:physicalPort>
</spirit:portMap>
<spirit:portMap>
<spirit:logicalPort>
<spirit:name>WDATA</spirit:name>
</spirit:logicalPort>
<spirit:physicalPort>
<spirit:name>s00_axi_wdata</spirit:name>
</spirit:physicalPort>
</spirit:portMap>
<spirit:portMap>
<spirit:logicalPort>
<spirit:name>WSTRB</spirit:name>
</spirit:logicalPort>
<spirit:physicalPort>
<spirit:name>s00_axi_wstrb</spirit:name>
</spirit:physicalPort>
</spirit:portMap>
<spirit:portMap>
<spirit:logicalPort>
<spirit:name>WVALID</spirit:name>
</spirit:logicalPort>
<spirit:physicalPort>
<spirit:name>s00_axi_wvalid</spirit:name>
</spirit:physicalPort>
</spirit:portMap>
<spirit:portMap>
<spirit:logicalPort>
<spirit:name>WREADY</spirit:name>
</spirit:logicalPort>
<spirit:physicalPort>
<spirit:name>s00_axi_wready</spirit:name>
</spirit:physicalPort>
</spirit:portMap>
<spirit:portMap>
<spirit:logicalPort>
<spirit:name>BRESP</spirit:name>
</spirit:logicalPort>
<spirit:physicalPort>
<spirit:name>s00_axi_bresp</spirit:name>
</spirit:physicalPort>
</spirit:portMap>
<spirit:portMap>
<spirit:logicalPort>
<spirit:name>BVALID</spirit:name>
</spirit:logicalPort>
<spirit:physicalPort>
<spirit:name>s00_axi_bvalid</spirit:name>
</spirit:physicalPort>
</spirit:portMap>
<spirit:portMap>
<spirit:logicalPort>
<spirit:name>BREADY</spirit:name>
</spirit:logicalPort>
<spirit:physicalPort>
<spirit:name>s00_axi_bready</spirit:name>
</spirit:physicalPort>
</spirit:portMap>
<spirit:portMap>
<spirit:logicalPort>
<spirit:name>ARADDR</spirit:name>
</spirit:logicalPort>
<spirit:physicalPort>
<spirit:name>s00_axi_araddr</spirit:name>
</spirit:physicalPort>
</spirit:portMap>
<spirit:portMap>
<spirit:logicalPort>
<spirit:name>ARPROT</spirit:name>
</spirit:logicalPort>
<spirit:physicalPort>
<spirit:name>s00_axi_arprot</spirit:name>
</spirit:physicalPort>
</spirit:portMap>
<spirit:portMap>
<spirit:logicalPort>
<spirit:name>ARVALID</spirit:name>
</spirit:logicalPort>
<spirit:physicalPort>
<spirit:name>s00_axi_arvalid</spirit:name>
</spirit:physicalPort>
</spirit:portMap>
<spirit:portMap>
<spirit:logicalPort>
<spirit:name>ARREADY</spirit:name>
</spirit:logicalPort>
<spirit:physicalPort>
<spirit:name>s00_axi_arready</spirit:name>
</spirit:physicalPort>
</spirit:portMap>
<spirit:portMap>
<spirit:logicalPort>
<spirit:name>RDATA</spirit:name>
</spirit:logicalPort>
<spirit:physicalPort>
<spirit:name>s00_axi_rdata</spirit:name>
</spirit:physicalPort>
</spirit:portMap>
<spirit:portMap>
<spirit:logicalPort>
<spirit:name>RRESP</spirit:name>
</spirit:logicalPort>
<spirit:physicalPort>
<spirit:name>s00_axi_rresp</spirit:name>
</spirit:physicalPort>
</spirit:portMap>
<spirit:portMap>
<spirit:logicalPort>
<spirit:name>RVALID</spirit:name>
</spirit:logicalPort>
<spirit:physicalPort>
<spirit:name>s00_axi_rvalid</spirit:name>
</spirit:physicalPort>
</spirit:portMap>
<spirit:portMap>
<spirit:logicalPort>
<spirit:name>RREADY</spirit:name>
</spirit:logicalPort>
<spirit:physicalPort>
<spirit:name>s00_axi_rready</spirit:name>
</spirit:physicalPort>
</spirit:portMap>
</spirit:portMaps>
<spirit:parameters>
<spirit:parameter>
<spirit:name>WIZ_DATA_WIDTH</spirit:name>
<spirit:value spirit:format="long" spirit:id="BUSIFPARAM_VALUE.S00_AXI.WIZ_DATA_WIDTH" spirit:choiceRef="choice_list_6fc15197">32</spirit:value>
</spirit:parameter>
<spirit:parameter>
<spirit:name>WIZ_NUM_REG</spirit:name>
<spirit:value spirit:format="long" spirit:id="BUSIFPARAM_VALUE.S00_AXI.WIZ_NUM_REG" spirit:minimum="4" spirit:maximum="512" spirit:rangeType="long">24</spirit:value>
</spirit:parameter>
<spirit:parameter>
<spirit:name>SUPPORTS_NARROW_BURST</spirit:name>
<spirit:value spirit:format="long" spirit:id="BUSIFPARAM_VALUE.S00_AXI.SUPPORTS_NARROW_BURST" spirit:choiceRef="choice_pairs_ce1226b1">0</spirit:value>
</spirit:parameter>
</spirit:parameters>
</spirit:busInterface>
<spirit:busInterface>
<spirit:name>S00_AXI_RST</spirit:name>
<spirit:busType spirit:vendor="xilinx.com" spirit:library="signal" spirit:name="reset" spirit:version="1.0"/>
<spirit:abstractionType spirit:vendor="xilinx.com" spirit:library="signal" spirit:name="reset_rtl" spirit:version="1.0"/>
<spirit:slave/>
<spirit:portMaps>
<spirit:portMap>
<spirit:logicalPort>
<spirit:name>RST</spirit:name>
</spirit:logicalPort>
<spirit:physicalPort>
<spirit:name>s00_axi_aresetn</spirit:name>
</spirit:physicalPort>
</spirit:portMap>
</spirit:portMaps>
<spirit:parameters>
<spirit:parameter>
<spirit:name>POLARITY</spirit:name>
<spirit:value spirit:id="BUSIFPARAM_VALUE.S00_AXI_RST.POLARITY" spirit:choiceRef="choice_list_9d8b0d81">ACTIVE_LOW</spirit:value>
</spirit:parameter>
</spirit:parameters>
</spirit:busInterface>
<spirit:busInterface>
<spirit:name>S00_AXI_CLK</spirit:name>
<spirit:busType spirit:vendor="xilinx.com" spirit:library="signal" spirit:name="clock" spirit:version="1.0"/>
<spirit:abstractionType spirit:vendor="xilinx.com" spirit:library="signal" spirit:name="clock_rtl" spirit:version="1.0"/>
<spirit:slave/>
<spirit:portMaps>
<spirit:portMap>
<spirit:logicalPort>
<spirit:name>CLK</spirit:name>
</spirit:logicalPort>
<spirit:physicalPort>
<spirit:name>s00_axi_aclk</spirit:name>
</spirit:physicalPort>
</spirit:portMap>
</spirit:portMaps>
<spirit:parameters>
<spirit:parameter>
<spirit:name>ASSOCIATED_BUSIF</spirit:name>
<spirit:value spirit:id="BUSIFPARAM_VALUE.S00_AXI_CLK.ASSOCIATED_BUSIF">S00_AXI</spirit:value>
</spirit:parameter>
<spirit:parameter>
<spirit:name>ASSOCIATED_RESET</spirit:name>
<spirit:value spirit:id="BUSIFPARAM_VALUE.S00_AXI_CLK.ASSOCIATED_RESET">s00_axi_aresetn</spirit:value>
</spirit:parameter>
</spirit:parameters>
</spirit:busInterface>
</spirit:busInterfaces>
<spirit:memoryMaps>
<spirit:memoryMap>
<spirit:name>S00_AXI</spirit:name>
<spirit:addressBlock>
<spirit:name>S00_AXI_reg</spirit:name>
<spirit:baseAddress spirit:format="long" spirit:resolve="user">0</spirit:baseAddress>
<spirit:range spirit:format="long">4096</spirit:range>
<spirit:width spirit:format="long">32</spirit:width>
<spirit:usage>register</spirit:usage>
<spirit:parameters>
<spirit:parameter>
<spirit:name>OFFSET_BASE_PARAM</spirit:name>
<spirit:value spirit:id="ADDRBLOCKPARAM_VALUE.S00_AXI.S00_AXI_REG.OFFSET_BASE_PARAM">C_S00_AXI_BASEADDR</spirit:value>
</spirit:parameter>
<spirit:parameter>
<spirit:name>OFFSET_HIGH_PARAM</spirit:name>
<spirit:value spirit:id="ADDRBLOCKPARAM_VALUE.S00_AXI.S00_AXI_REG.OFFSET_HIGH_PARAM">C_S00_AXI_HIGHADDR</spirit:value>
</spirit:parameter>
</spirit:parameters>
</spirit:addressBlock>
</spirit:memoryMap>
</spirit:memoryMaps>
<spirit:model>
<spirit:views>
<spirit:view>
<spirit:name>xilinx_verilogsynthesis</spirit:name>
<spirit:displayName>Verilog Synthesis</spirit:displayName>
<spirit:envIdentifier>verilogSource:vivado.xilinx.com:synthesis</spirit:envIdentifier>
<spirit:language>verilog</spirit:language>
<spirit:modelName>axi_lite_para24_v1_0</spirit:modelName>
<spirit:fileSetRef>
<spirit:localName>xilinx_verilogsynthesis_view_fileset</spirit:localName>
</spirit:fileSetRef>
<spirit:parameters>
<spirit:parameter>
<spirit:name>viewChecksum</spirit:name>
<spirit:value>ca3944e2</spirit:value>
</spirit:parameter>
</spirit:parameters>
</spirit:view>
<spirit:view>
<spirit:name>xilinx_verilogbehavioralsimulation</spirit:name>
<spirit:displayName>Verilog Simulation</spirit:displayName>
<spirit:envIdentifier>verilogSource:vivado.xilinx.com:simulation</spirit:envIdentifier>
<spirit:language>verilog</spirit:language>
<spirit:modelName>axi_lite_para24_v1_0</spirit:modelName>
<spirit:fileSetRef>
<spirit:localName>xilinx_verilogbehavioralsimulation_view_fileset</spirit:localName>
</spirit:fileSetRef>
<spirit:parameters>
<spirit:parameter>
<spirit:name>viewChecksum</spirit:name>
<spirit:value>ca3944e2</spirit:value>
</spirit:parameter>
</spirit:parameters>
</spirit:view>
<spirit:view>
<spirit:name>xilinx_softwaredriver</spirit:name>
<spirit:displayName>Software Driver</spirit:displayName>
<spirit:envIdentifier>:vivado.xilinx.com:sw.driver</spirit:envIdentifier>
<spirit:fileSetRef>
<spirit:localName>xilinx_softwaredriver_view_fileset</spirit:localName>
</spirit:fileSetRef>
<spirit:parameters>
<spirit:parameter>
<spirit:name>viewChecksum</spirit:name>
<spirit:value>d4e3cdf9</spirit:value>
</spirit:parameter>
</spirit:parameters>
</spirit:view>
<spirit:view>
<spirit:name>xilinx_xpgui</spirit:name>
<spirit:displayName>UI Layout</spirit:displayName>
<spirit:envIdentifier>:vivado.xilinx.com:xgui.ui</spirit:envIdentifier>
<spirit:fileSetRef>
<spirit:localName>xilinx_xpgui_view_fileset</spirit:localName>
</spirit:fileSetRef>
<spirit:parameters>
<spirit:parameter>
<spirit:name>viewChecksum</spirit:name>
<spirit:value>0e5443b4</spirit:value>
</spirit:parameter>
</spirit:parameters>
</spirit:view>
<spirit:view>
<spirit:name>bd_tcl</spirit:name>
<spirit:displayName>Block Diagram</spirit:displayName>
<spirit:envIdentifier>:vivado.xilinx.com:block.diagram</spirit:envIdentifier>
<spirit:fileSetRef>
<spirit:localName>bd_tcl_view_fileset</spirit:localName>
</spirit:fileSetRef>
<spirit:parameters>
<spirit:parameter>
<spirit:name>viewChecksum</spirit:name>
<spirit:value>16328387</spirit:value>
</spirit:parameter>
</spirit:parameters>
</spirit:view>
</spirit:views>
<spirit:ports>
<spirit:port>
<spirit:name>dma_start</spirit:name>
<spirit:wire>
<spirit:direction>in</spirit:direction>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>std_logic</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
<spirit:port>
<spirit:name>card_state1</spirit:name>
<spirit:wire>
<spirit:direction>in</spirit:direction>
<spirit:vector>
<spirit:left spirit:format="long">3</spirit:left>
<spirit:right spirit:format="long">0</spirit:right>
</spirit:vector>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>std_logic_vector</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
<spirit:port>
<spirit:name>card_state2</spirit:name>
<spirit:wire>
<spirit:direction>in</spirit:direction>
<spirit:vector>
<spirit:left spirit:format="long">3</spirit:left>
<spirit:right spirit:format="long">0</spirit:right>
</spirit:vector>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>std_logic_vector</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
<spirit:port>
<spirit:name>card_state3</spirit:name>
<spirit:wire>
<spirit:direction>in</spirit:direction>
<spirit:vector>
<spirit:left spirit:format="long">3</spirit:left>
<spirit:right spirit:format="long">0</spirit:right>
</spirit:vector>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>std_logic_vector</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
<spirit:port>
<spirit:name>card_state4</spirit:name>
<spirit:wire>
<spirit:direction>in</spirit:direction>
<spirit:vector>
<spirit:left spirit:format="long">3</spirit:left>
<spirit:right spirit:format="long">0</spirit:right>
</spirit:vector>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>std_logic_vector</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
<spirit:port>
<spirit:name>card_state5</spirit:name>
<spirit:wire>
<spirit:direction>in</spirit:direction>
<spirit:vector>
<spirit:left spirit:format="long">3</spirit:left>
<spirit:right spirit:format="long">0</spirit:right>
</spirit:vector>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>std_logic_vector</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
<spirit:port>
<spirit:name>card_state6</spirit:name>
<spirit:wire>
<spirit:direction>in</spirit:direction>
<spirit:vector>
<spirit:left spirit:format="long">3</spirit:left>
<spirit:right spirit:format="long">0</spirit:right>
</spirit:vector>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>std_logic_vector</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
<spirit:port>
<spirit:name>sample_rate</spirit:name>
<spirit:wire>
<spirit:direction>out</spirit:direction>
<spirit:vector>
<spirit:left spirit:format="long">31</spirit:left>
<spirit:right spirit:format="long">0</spirit:right>
</spirit:vector>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>std_logic_vector</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
<spirit:port>
<spirit:name>total_sample_num</spirit:name>
<spirit:wire>
<spirit:direction>out</spirit:direction>
<spirit:vector>
<spirit:left spirit:format="long">31</spirit:left>
<spirit:right spirit:format="long">0</spirit:right>
</spirit:vector>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>std_logic_vector</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
<spirit:port>
<spirit:name>sample_num</spirit:name>
<spirit:wire>
<spirit:direction>out</spirit:direction>
<spirit:vector>
<spirit:left spirit:format="long">31</spirit:left>
<spirit:right spirit:format="long">0</spirit:right>
</spirit:vector>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>std_logic_vector</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
<spirit:port>
<spirit:name>channel_mask1</spirit:name>
<spirit:wire>
<spirit:direction>out</spirit:direction>
<spirit:vector>
<spirit:left spirit:format="long">31</spirit:left>
<spirit:right spirit:format="long">0</spirit:right>
</spirit:vector>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>std_logic_vector</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
<spirit:port>
<spirit:name>channel_mask2</spirit:name>
<spirit:wire>
<spirit:direction>out</spirit:direction>
<spirit:vector>
<spirit:left spirit:format="long">31</spirit:left>
<spirit:right spirit:format="long">0</spirit:right>
</spirit:vector>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>std_logic_vector</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
<spirit:port>
<spirit:name>channel_mask3</spirit:name>
<spirit:wire>
<spirit:direction>out</spirit:direction>
<spirit:vector>
<spirit:left spirit:format="long">31</spirit:left>
<spirit:right spirit:format="long">0</spirit:right>
</spirit:vector>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>std_logic_vector</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
<spirit:port>
<spirit:name>channel_mask4</spirit:name>
<spirit:wire>
<spirit:direction>out</spirit:direction>
<spirit:vector>
<spirit:left spirit:format="long">31</spirit:left>
<spirit:right spirit:format="long">0</spirit:right>
</spirit:vector>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>std_logic_vector</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
<spirit:port>
<spirit:name>channel_mask5</spirit:name>
<spirit:wire>
<spirit:direction>out</spirit:direction>
<spirit:vector>
<spirit:left spirit:format="long">31</spirit:left>
<spirit:right spirit:format="long">0</spirit:right>
</spirit:vector>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>std_logic_vector</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
<spirit:port>
<spirit:name>channel_mask6</spirit:name>
<spirit:wire>
<spirit:direction>out</spirit:direction>
<spirit:vector>
<spirit:left spirit:format="long">31</spirit:left>
<spirit:right spirit:format="long">0</spirit:right>
</spirit:vector>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>std_logic_vector</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
<spirit:port>
<spirit:name>sample_coef</spirit:name>
<spirit:wire>
<spirit:direction>out</spirit:direction>
<spirit:vector>
<spirit:left spirit:format="long">7</spirit:left>
<spirit:right spirit:format="long">0</spirit:right>
</spirit:vector>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>std_logic_vector</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
<spirit:port>
<spirit:name>job_id</spirit:name>
<spirit:wire>
<spirit:direction>out</spirit:direction>
<spirit:vector>
<spirit:left spirit:format="long">7</spirit:left>
<spirit:right spirit:format="long">0</spirit:right>
</spirit:vector>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>std_logic_vector</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
<spirit:port>
<spirit:name>stream_mode</spirit:name>
<spirit:wire>
<spirit:direction>out</spirit:direction>
<spirit:vector>
<spirit:left spirit:format="long">7</spirit:left>
<spirit:right spirit:format="long">0</spirit:right>
</spirit:vector>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>std_logic_vector</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
<spirit:port>
<spirit:name>led_lite</spirit:name>
<spirit:wire>
<spirit:direction>out</spirit:direction>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>std_logic</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
<spirit:port>
<spirit:name>dest_ip</spirit:name>
<spirit:wire>
<spirit:direction>out</spirit:direction>
<spirit:vector>
<spirit:left spirit:format="long">31</spirit:left>
<spirit:right spirit:format="long">0</spirit:right>
</spirit:vector>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>std_logic_vector</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
<spirit:port>
<spirit:name>static_arp</spirit:name>
<spirit:wire>
<spirit:direction>out</spirit:direction>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>std_logic</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
<spirit:port>
<spirit:name>static_dest_mac</spirit:name>
<spirit:wire>
<spirit:direction>out</spirit:direction>
<spirit:vector>
<spirit:left spirit:format="long">47</spirit:left>
<spirit:right spirit:format="long">0</spirit:right>
</spirit:vector>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>std_logic_vector</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
<spirit:port>
<spirit:name>s00_axi_aclk</spirit:name>
<spirit:wire>
<spirit:direction>in</spirit:direction>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>wire</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
<spirit:port>
<spirit:name>s00_axi_aresetn</spirit:name>
<spirit:wire>
<spirit:direction>in</spirit:direction>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>wire</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
<spirit:port>
<spirit:name>s00_axi_awaddr</spirit:name>
<spirit:wire>
<spirit:direction>in</spirit:direction>
<spirit:vector>
<spirit:left spirit:format="long" spirit:resolve="dependent" spirit:dependency="(spirit:decode(id(&apos;MODELPARAM_VALUE.C_S00_AXI_ADDR_WIDTH&apos;)) - 1)">6</spirit:left>
<spirit:right spirit:format="long">0</spirit:right>
</spirit:vector>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>wire</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
<spirit:port>
<spirit:name>s00_axi_awprot</spirit:name>
<spirit:wire>
<spirit:direction>in</spirit:direction>
<spirit:vector>
<spirit:left spirit:format="long">2</spirit:left>
<spirit:right spirit:format="long">0</spirit:right>
</spirit:vector>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>wire</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
<spirit:port>
<spirit:name>s00_axi_awvalid</spirit:name>
<spirit:wire>
<spirit:direction>in</spirit:direction>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>wire</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
<spirit:port>
<spirit:name>s00_axi_awready</spirit:name>
<spirit:wire>
<spirit:direction>out</spirit:direction>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>wire</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
<spirit:port>
<spirit:name>s00_axi_wdata</spirit:name>
<spirit:wire>
<spirit:direction>in</spirit:direction>
<spirit:vector>
<spirit:left spirit:format="long" spirit:resolve="dependent" spirit:dependency="(spirit:decode(id(&apos;MODELPARAM_VALUE.C_S00_AXI_DATA_WIDTH&apos;)) - 1)">31</spirit:left>
<spirit:right spirit:format="long">0</spirit:right>
</spirit:vector>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>wire</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
<spirit:port>
<spirit:name>s00_axi_wstrb</spirit:name>
<spirit:wire>
<spirit:direction>in</spirit:direction>
<spirit:vector>
<spirit:left spirit:format="long" spirit:resolve="dependent" spirit:dependency="((spirit:decode(id(&apos;MODELPARAM_VALUE.C_S00_AXI_DATA_WIDTH&apos;)) / 8) - 1)">3</spirit:left>
<spirit:right spirit:format="long">0</spirit:right>
</spirit:vector>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>wire</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
<spirit:port>
<spirit:name>s00_axi_wvalid</spirit:name>
<spirit:wire>
<spirit:direction>in</spirit:direction>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>wire</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
<spirit:port>
<spirit:name>s00_axi_wready</spirit:name>
<spirit:wire>
<spirit:direction>out</spirit:direction>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>wire</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
<spirit:port>
<spirit:name>s00_axi_bresp</spirit:name>
<spirit:wire>
<spirit:direction>out</spirit:direction>
<spirit:vector>
<spirit:left spirit:format="long">1</spirit:left>
<spirit:right spirit:format="long">0</spirit:right>
</spirit:vector>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>wire</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
<spirit:port>
<spirit:name>s00_axi_bvalid</spirit:name>
<spirit:wire>
<spirit:direction>out</spirit:direction>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>wire</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
<spirit:port>
<spirit:name>s00_axi_bready</spirit:name>
<spirit:wire>
<spirit:direction>in</spirit:direction>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>wire</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
<spirit:port>
<spirit:name>s00_axi_araddr</spirit:name>
<spirit:wire>
<spirit:direction>in</spirit:direction>
<spirit:vector>
<spirit:left spirit:format="long" spirit:resolve="dependent" spirit:dependency="(spirit:decode(id(&apos;MODELPARAM_VALUE.C_S00_AXI_ADDR_WIDTH&apos;)) - 1)">6</spirit:left>
<spirit:right spirit:format="long">0</spirit:right>
</spirit:vector>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>wire</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
<spirit:port>
<spirit:name>s00_axi_arprot</spirit:name>
<spirit:wire>
<spirit:direction>in</spirit:direction>
<spirit:vector>
<spirit:left spirit:format="long">2</spirit:left>
<spirit:right spirit:format="long">0</spirit:right>
</spirit:vector>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>wire</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
<spirit:port>
<spirit:name>s00_axi_arvalid</spirit:name>
<spirit:wire>
<spirit:direction>in</spirit:direction>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>wire</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
<spirit:port>
<spirit:name>s00_axi_arready</spirit:name>
<spirit:wire>
<spirit:direction>out</spirit:direction>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>wire</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
<spirit:port>
<spirit:name>s00_axi_rdata</spirit:name>
<spirit:wire>
<spirit:direction>out</spirit:direction>
<spirit:vector>
<spirit:left spirit:format="long" spirit:resolve="dependent" spirit:dependency="(spirit:decode(id(&apos;MODELPARAM_VALUE.C_S00_AXI_DATA_WIDTH&apos;)) - 1)">31</spirit:left>
<spirit:right spirit:format="long">0</spirit:right>
</spirit:vector>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>wire</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
<spirit:port>
<spirit:name>s00_axi_rresp</spirit:name>
<spirit:wire>
<spirit:direction>out</spirit:direction>
<spirit:vector>
<spirit:left spirit:format="long">1</spirit:left>
<spirit:right spirit:format="long">0</spirit:right>
</spirit:vector>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>wire</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
<spirit:port>
<spirit:name>s00_axi_rvalid</spirit:name>
<spirit:wire>
<spirit:direction>out</spirit:direction>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>wire</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
<spirit:port>
<spirit:name>s00_axi_rready</spirit:name>
<spirit:wire>
<spirit:direction>in</spirit:direction>
<spirit:wireTypeDefs>
<spirit:wireTypeDef>
<spirit:typeName>wire</spirit:typeName>
<spirit:viewNameRef>xilinx_verilogsynthesis</spirit:viewNameRef>
<spirit:viewNameRef>xilinx_verilogbehavioralsimulation</spirit:viewNameRef>
</spirit:wireTypeDef>
</spirit:wireTypeDefs>
</spirit:wire>
</spirit:port>
</spirit:ports>
<spirit:modelParameters>
<spirit:modelParameter xsi:type="spirit:nameValueTypeType" spirit:dataType="integer">
<spirit:name>C_S00_AXI_DATA_WIDTH</spirit:name>
<spirit:displayName>C S00 AXI DATA WIDTH</spirit:displayName>
<spirit:description>Width of S_AXI data bus</spirit:description>
<spirit:value spirit:format="long" spirit:resolve="generated" spirit:id="MODELPARAM_VALUE.C_S00_AXI_DATA_WIDTH" spirit:order="3" spirit:rangeType="long">32</spirit:value>
</spirit:modelParameter>
<spirit:modelParameter spirit:dataType="integer">
<spirit:name>C_S00_AXI_ADDR_WIDTH</spirit:name>
<spirit:displayName>C S00 AXI ADDR WIDTH</spirit:displayName>
<spirit:description>Width of S_AXI address bus</spirit:description>
<spirit:value spirit:format="long" spirit:resolve="generated" spirit:id="MODELPARAM_VALUE.C_S00_AXI_ADDR_WIDTH" spirit:order="4" spirit:rangeType="long">7</spirit:value>
</spirit:modelParameter>
</spirit:modelParameters>
</spirit:model>
<spirit:choices>
<spirit:choice>
<spirit:name>choice_list_6fc15197</spirit:name>
<spirit:enumeration>32</spirit:enumeration>
</spirit:choice>
<spirit:choice>
<spirit:name>choice_list_9d8b0d81</spirit:name>
<spirit:enumeration>ACTIVE_HIGH</spirit:enumeration>
<spirit:enumeration>ACTIVE_LOW</spirit:enumeration>
</spirit:choice>
<spirit:choice>
<spirit:name>choice_pairs_ce1226b1</spirit:name>
<spirit:enumeration spirit:text="true">1</spirit:enumeration>
<spirit:enumeration spirit:text="false">0</spirit:enumeration>
</spirit:choice>
</spirit:choices>
<spirit:fileSets>
<spirit:fileSet>
<spirit:name>xilinx_verilogsynthesis_view_fileset</spirit:name>
<spirit:file>
<spirit:name>hdl/axi_lite_para24_v1_0_S00_AXI.v</spirit:name>
<spirit:fileType>verilogSource</spirit:fileType>
</spirit:file>
<spirit:file>
<spirit:name>hdl/axi_lite_para24_v1_0.v</spirit:name>
<spirit:fileType>verilogSource</spirit:fileType>
<spirit:userFileType>CHECKSUM_7457b9a7</spirit:userFileType>
</spirit:file>
</spirit:fileSet>
<spirit:fileSet>
<spirit:name>xilinx_verilogbehavioralsimulation_view_fileset</spirit:name>
<spirit:file>
<spirit:name>hdl/axi_lite_para24_v1_0_S00_AXI.v</spirit:name>
<spirit:fileType>verilogSource</spirit:fileType>
</spirit:file>
<spirit:file>
<spirit:name>hdl/axi_lite_para24_v1_0.v</spirit:name>
<spirit:fileType>verilogSource</spirit:fileType>
</spirit:file>
</spirit:fileSet>
<spirit:fileSet>
<spirit:name>xilinx_softwaredriver_view_fileset</spirit:name>
<spirit:file>
<spirit:name>drivers/axi_lite_para24_v1_0/data/axi_lite_para24.mdd</spirit:name>
<spirit:userFileType>mdd</spirit:userFileType>
<spirit:userFileType>driver_mdd</spirit:userFileType>
</spirit:file>
<spirit:file>
<spirit:name>drivers/axi_lite_para24_v1_0/data/axi_lite_para24.tcl</spirit:name>
<spirit:fileType>tclSource</spirit:fileType>
<spirit:userFileType>driver_tcl</spirit:userFileType>
</spirit:file>
<spirit:file>
<spirit:name>drivers/axi_lite_para24_v1_0/src/Makefile</spirit:name>
<spirit:userFileType>driver_src</spirit:userFileType>
</spirit:file>
<spirit:file>
<spirit:name>drivers/axi_lite_para24_v1_0/src/axi_lite_para24.h</spirit:name>
<spirit:fileType>cSource</spirit:fileType>
<spirit:userFileType>driver_src</spirit:userFileType>
</spirit:file>
<spirit:file>
<spirit:name>drivers/axi_lite_para24_v1_0/src/axi_lite_para24.c</spirit:name>
<spirit:fileType>cSource</spirit:fileType>
<spirit:userFileType>driver_src</spirit:userFileType>
</spirit:file>
<spirit:file>
<spirit:name>drivers/axi_lite_para24_v1_0/src/axi_lite_para24_selftest.c</spirit:name>
<spirit:fileType>cSource</spirit:fileType>
<spirit:userFileType>driver_src</spirit:userFileType>
</spirit:file>
</spirit:fileSet>
<spirit:fileSet>
<spirit:name>xilinx_xpgui_view_fileset</spirit:name>
<spirit:file>
<spirit:name>xgui/axi_lite_para24_v1_0.tcl</spirit:name>
<spirit:fileType>tclSource</spirit:fileType>
<spirit:userFileType>CHECKSUM_0e5443b4</spirit:userFileType>
<spirit:userFileType>XGUI_VERSION_2</spirit:userFileType>
</spirit:file>
</spirit:fileSet>
<spirit:fileSet>
<spirit:name>bd_tcl_view_fileset</spirit:name>
<spirit:file>
<spirit:name>bd/bd.tcl</spirit:name>
<spirit:fileType>tclSource</spirit:fileType>
</spirit:file>
</spirit:fileSet>
</spirit:fileSets>
<spirit:description>My new AXI IP</spirit:description>
<spirit:parameters>
<spirit:parameter>
<spirit:name>C_S00_AXI_DATA_WIDTH</spirit:name>
<spirit:displayName>C S00 AXI DATA WIDTH</spirit:displayName>
<spirit:description>Width of S_AXI data bus</spirit:description>
<spirit:value spirit:format="long" spirit:resolve="user" spirit:id="PARAM_VALUE.C_S00_AXI_DATA_WIDTH" spirit:choiceRef="choice_list_6fc15197" spirit:order="3">32</spirit:value>
<spirit:vendorExtensions>
<xilinx:parameterInfo>
<xilinx:enablement>
<xilinx:isEnabled xilinx:id="PARAM_ENABLEMENT.C_S00_AXI_DATA_WIDTH">false</xilinx:isEnabled>
</xilinx:enablement>
</xilinx:parameterInfo>
</spirit:vendorExtensions>
</spirit:parameter>
<spirit:parameter>
<spirit:name>C_S00_AXI_ADDR_WIDTH</spirit:name>
<spirit:displayName>C S00 AXI ADDR WIDTH</spirit:displayName>
<spirit:description>Width of S_AXI address bus</spirit:description>
<spirit:value spirit:format="long" spirit:resolve="user" spirit:id="PARAM_VALUE.C_S00_AXI_ADDR_WIDTH" spirit:order="4" spirit:rangeType="long">7</spirit:value>
<spirit:vendorExtensions>
<xilinx:parameterInfo>
<xilinx:enablement>
<xilinx:isEnabled xilinx:id="PARAM_ENABLEMENT.C_S00_AXI_ADDR_WIDTH">false</xilinx:isEnabled>
</xilinx:enablement>
</xilinx:parameterInfo>
</spirit:vendorExtensions>
</spirit:parameter>
<spirit:parameter>
<spirit:name>C_S00_AXI_BASEADDR</spirit:name>
<spirit:displayName>C S00 AXI BASEADDR</spirit:displayName>
<spirit:value spirit:format="bitString" spirit:resolve="user" spirit:id="PARAM_VALUE.C_S00_AXI_BASEADDR" spirit:order="5" spirit:bitStringLength="32">0xFFFFFFFF</spirit:value>
<spirit:vendorExtensions>
<xilinx:parameterInfo>
<xilinx:enablement>
<xilinx:isEnabled xilinx:id="PARAM_ENABLEMENT.C_S00_AXI_BASEADDR">false</xilinx:isEnabled>
</xilinx:enablement>
</xilinx:parameterInfo>
</spirit:vendorExtensions>
</spirit:parameter>
<spirit:parameter>
<spirit:name>C_S00_AXI_HIGHADDR</spirit:name>
<spirit:displayName>C S00 AXI HIGHADDR</spirit:displayName>
<spirit:value spirit:format="bitString" spirit:resolve="user" spirit:id="PARAM_VALUE.C_S00_AXI_HIGHADDR" spirit:order="6" spirit:bitStringLength="32">0x00000000</spirit:value>
<spirit:vendorExtensions>
<xilinx:parameterInfo>
<xilinx:enablement>
<xilinx:isEnabled xilinx:id="PARAM_ENABLEMENT.C_S00_AXI_HIGHADDR">false</xilinx:isEnabled>
</xilinx:enablement>
</xilinx:parameterInfo>
</spirit:vendorExtensions>
</spirit:parameter>
<spirit:parameter>
<spirit:name>Component_Name</spirit:name>
<spirit:value spirit:resolve="user" spirit:id="PARAM_VALUE.Component_Name" spirit:order="1">axi_lite_para24_v1_0</spirit:value>
</spirit:parameter>
</spirit:parameters>
<spirit:vendorExtensions>
<xilinx:coreExtensions>
<xilinx:supportedFamilies>
<xilinx:family xilinx:lifeCycle="Pre-Production">zynquplus</xilinx:family>
</xilinx:supportedFamilies>
<xilinx:taxonomies>
<xilinx:taxonomy>AXI_Peripheral</xilinx:taxonomy>
</xilinx:taxonomies>
<xilinx:displayName>axi_lite_para24_v1.0</xilinx:displayName>
<xilinx:coreRevision>4</xilinx:coreRevision>
<xilinx:coreCreationDateTime>2025-09-12T04:23:56Z</xilinx:coreCreationDateTime>
</xilinx:coreExtensions>
<xilinx:packagingInfo>
<xilinx:xilinxVersion>2023.2</xilinx:xilinxVersion>
<xilinx:checksum xilinx:scope="busInterfaces" xilinx:value="62723e7a"/>
<xilinx:checksum xilinx:scope="memoryMaps" xilinx:value="ed1368d5"/>
<xilinx:checksum xilinx:scope="fileGroups" xilinx:value="a38d90a5"/>
<xilinx:checksum xilinx:scope="ports" xilinx:value="d6ebcf5a"/>
<xilinx:checksum xilinx:scope="hdlParameters" xilinx:value="a0a6f17f"/>
<xilinx:checksum xilinx:scope="parameters" xilinx:value="eade2363"/>
</xilinx:packagingInfo>
</spirit:vendorExtensions>
</spirit:component>
FPGA/ip_repo/axi_lite_para24_1_0/drivers/axi_lite_para24_v1_0/data/axi_lite_para24.mdd 0 → 100644
View file @ 61b62b1f
OPTION psf_version = 2.1;
BEGIN DRIVER axi_lite_para24
OPTION supported_peripherals = (axi_lite_para24);
OPTION copyfiles = all;
OPTION VERSION = 1.0;
OPTION NAME = axi_lite_para24;
END DRIVER
FPGA/ip_repo/axi_lite_para24_1_0/drivers/axi_lite_para24_v1_0/data/axi_lite_para24.tcl 0 → 100644
View file @ 61b62b1f
proc generate {drv_handle} {
xdefine_include_file $drv_handle "xparameters.h" "axi_lite_para24" "NUM_INSTANCES" "DEVICE_ID" "C_S00_AXI_BASEADDR" "C_S00_AXI_HIGHADDR"
}
FPGA/ip_repo/axi_lite_para24_1_0/drivers/axi_lite_para24_v1_0/src/Makefile 0 → 100644
View file @ 61b62b1f
COMPILER=
ARCHIVER=
CP=cp
COMPILER_FLAGS=
EXTRA_COMPILER_FLAGS=
LIB=libxil.a
RELEASEDIR=../../../lib
INCLUDEDIR=../../../include
INCLUDES=-I./. -I${INCLUDEDIR}
INCLUDEFILES=*.h
LIBSOURCES=$(wildcard *.c)
OBJECTS = $(addsuffix .o, $(basename $(wildcard *.c)))
ASSEMBLY_OBJECTS = $(addsuffix .o, $(basename $(wildcard *.S)))
libs:
echo "Compiling axi_lite_para24..."
$(COMPILER) $(COMPILER_FLAGS) $(EXTRA_COMPILER_FLAGS) $(INCLUDES) $(LIBSOURCES)
$(ARCHIVER) -r ${RELEASEDIR}/${LIB} ${OUTS}
make clean
include:
${CP} $(INCLUDEFILES) $(INCLUDEDIR)
clean:
rm -rf ${OUTS}
FPGA/ip_repo/axi_lite_para24_1_0/drivers/axi_lite_para24_v1_0/src/axi_lite_para24.c 0 → 100644
View file @ 61b62b1f
/***************************** Include Files *******************************/
#include "axi_lite_para24.h"
/************************** Function Definitions ***************************/
FPGA/ip_repo/axi_lite_para24_1_0/drivers/axi_lite_para24_v1_0/src/axi_lite_para24.h 0 → 100644
View file @ 61b62b1f
#ifndef AXI_LITE_PARA24_H
#define AXI_LITE_PARA24_H
/****************** Include Files ********************/
#include "xil_types.h"
#include "xstatus.h"
#define AXI_LITE_PARA24_S00_AXI_SLV_REG0_OFFSET 0
#define AXI_LITE_PARA24_S00_AXI_SLV_REG1_OFFSET 4
#define AXI_LITE_PARA24_S00_AXI_SLV_REG2_OFFSET 8
#define AXI_LITE_PARA24_S00_AXI_SLV_REG3_OFFSET 12
#define AXI_LITE_PARA24_S00_AXI_SLV_REG4_OFFSET 16
#define AXI_LITE_PARA24_S00_AXI_SLV_REG5_OFFSET 20
#define AXI_LITE_PARA24_S00_AXI_SLV_REG6_OFFSET 24
#define AXI_LITE_PARA24_S00_AXI_SLV_REG7_OFFSET 28
#define AXI_LITE_PARA24_S00_AXI_SLV_REG8_OFFSET 32
#define AXI_LITE_PARA24_S00_AXI_SLV_REG9_OFFSET 36
#define AXI_LITE_PARA24_S00_AXI_SLV_REG10_OFFSET 40
#define AXI_LITE_PARA24_S00_AXI_SLV_REG11_OFFSET 44
#define AXI_LITE_PARA24_S00_AXI_SLV_REG12_OFFSET 48
#define AXI_LITE_PARA24_S00_AXI_SLV_REG13_OFFSET 52
#define AXI_LITE_PARA24_S00_AXI_SLV_REG14_OFFSET 56
#define AXI_LITE_PARA24_S00_AXI_SLV_REG15_OFFSET 60
#define AXI_LITE_PARA24_S00_AXI_SLV_REG16_OFFSET 64
#define AXI_LITE_PARA24_S00_AXI_SLV_REG17_OFFSET 68
#define AXI_LITE_PARA24_S00_AXI_SLV_REG18_OFFSET 72
#define AXI_LITE_PARA24_S00_AXI_SLV_REG19_OFFSET 76
#define AXI_LITE_PARA24_S00_AXI_SLV_REG20_OFFSET 80
#define AXI_LITE_PARA24_S00_AXI_SLV_REG21_OFFSET 84
#define AXI_LITE_PARA24_S00_AXI_SLV_REG22_OFFSET 88
#define AXI_LITE_PARA24_S00_AXI_SLV_REG23_OFFSET 92
/**************************** Type Definitions *****************************/
/**
*
* Write a value to a AXI_LITE_PARA24 register. A 32 bit write is performed.
* If the component is implemented in a smaller width, only the least
* significant data is written.
*
* @param BaseAddress is the base address of the AXI_LITE_PARA24device.
* @param RegOffset is the register offset from the base to write to.
* @param Data is the data written to the register.
*
* @return None.
*
* @note
* C-style signature:
* void AXI_LITE_PARA24_mWriteReg(u32 BaseAddress, unsigned RegOffset, u32 Data)
*
*/
#define AXI_LITE_PARA24_mWriteReg(BaseAddress, RegOffset, Data) \
Xil_Out32((BaseAddress) + (RegOffset), (u32)(Data))
/**
*
* Read a value from a AXI_LITE_PARA24 register. A 32 bit read is performed.
* If the component is implemented in a smaller width, only the least
* significant data is read from the register. The most significant data
* will be read as 0.
*
* @param BaseAddress is the base address of the AXI_LITE_PARA24 device.
* @param RegOffset is the register offset from the base to write to.
*
* @return Data is the data from the register.
*
* @note
* C-style signature:
* u32 AXI_LITE_PARA24_mReadReg(u32 BaseAddress, unsigned RegOffset)
*
*/
#define AXI_LITE_PARA24_mReadReg(BaseAddress, RegOffset) \
Xil_In32((BaseAddress) + (RegOffset))
/************************** Function Prototypes ****************************/
/**
*
* Run a self-test on the driver/device. Note this may be a destructive test if
* resets of the device are performed.
*
* If the hardware system is not built correctly, this function may never
* return to the caller.
*
* @param baseaddr_p is the base address of the AXI_LITE_PARA24 instance to be worked on.
*
* @return
*
* - XST_SUCCESS if all self-test code passed
* - XST_FAILURE if any self-test code failed
*
* @note Caching must be turned off for this function to work.
* @note Self test may fail if data memory and device are not on the same bus.
*
*/
XStatus AXI_LITE_PARA24_Reg_SelfTest(void * baseaddr_p);
#endif // AXI_LITE_PARA24_H
FPGA/ip_repo/axi_lite_para24_1_0/drivers/axi_lite_para24_v1_0/src/axi_lite_para24_selftest.c 0 → 100644
View file @ 61b62b1f
/***************************** Include Files *******************************/
#include "axi_lite_para24.h"
#include "xparameters.h"
#include "stdio.h"
#include "xil_io.h"
/************************** Constant Definitions ***************************/
#define READ_WRITE_MUL_FACTOR 0x10
/************************** Function Definitions ***************************/
/**
*
* Run a self-test on the driver/device. Note this may be a destructive test if
* resets of the device are performed.
*
* If the hardware system is not built correctly, this function may never
* return to the caller.
*
* @param baseaddr_p is the base address of the AXI_LITE_PARA24instance to be worked on.
*
* @return
*
* - XST_SUCCESS if all self-test code passed
* - XST_FAILURE if any self-test code failed
*
* @note Caching must be turned off for this function to work.
* @note Self test may fail if data memory and device are not on the same bus.
*
*/
XStatus AXI_LITE_PARA24_Reg_SelfTest(void * baseaddr_p)
{
u32 baseaddr;
int write_loop_index;
int read_loop_index;
int Index;
baseaddr = (u32) baseaddr_p;
xil_printf("******************************\n\r");
xil_printf("* User Peripheral Self Test\n\r");
xil_printf("******************************\n\n\r");
/*
* Write to user logic slave module register(s) and read back
*/
xil_printf("User logic slave module test...\n\r");
for (write_loop_index = 0 ; write_loop_index < 4; write_loop_index++)
AXI_LITE_PARA24_mWriteReg (baseaddr, write_loop_index*4, (write_loop_index+1)*READ_WRITE_MUL_FACTOR);
for (read_loop_index = 0 ; read_loop_index < 4; read_loop_index++)
if ( AXI_LITE_PARA24_mReadReg (baseaddr, read_loop_index*4) != (read_loop_index+1)*READ_WRITE_MUL_FACTOR){
xil_printf ("Error reading register value at address %x\n", (int)baseaddr + read_loop_index*4);
return XST_FAILURE;
}
xil_printf(" - slave register write/read passed\n\n\r");
return XST_SUCCESS;
}
FPGA/ip_repo/axi_lite_para24_1_0/example_designs/bfm_design/axi_lite_para24_v1_0_tb.sv 0 → 100644
View file @ 61b62b1f
`timescale 1ns / 1ps
`include "axi_lite_para24_v1_0_tb_include.svh"
import axi_vip_pkg::*;
import axi_lite_para24_v1_0_bfm_1_master_0_0_pkg::*;
module axi_lite_para24_v1_0_tb();
xil_axi_uint error_cnt = 0;
xil_axi_uint comparison_cnt = 0;
axi_transaction wr_transaction;
axi_transaction rd_transaction;
axi_monitor_transaction mst_monitor_transaction;
axi_monitor_transaction master_moniter_transaction_queue[$];
xil_axi_uint master_moniter_transaction_queue_size =0;
axi_monitor_transaction mst_scb_transaction;
axi_monitor_transaction passthrough_monitor_transaction;
axi_monitor_transaction passthrough_master_moniter_transaction_queue[$];
xil_axi_uint passthrough_master_moniter_transaction_queue_size =0;
axi_monitor_transaction passthrough_mst_scb_transaction;
axi_monitor_transaction passthrough_slave_moniter_transaction_queue[$];
xil_axi_uint passthrough_slave_moniter_transaction_queue_size =0;
axi_monitor_transaction passthrough_slv_scb_transaction;
axi_monitor_transaction slv_monitor_transaction;
axi_monitor_transaction slave_moniter_transaction_queue[$];
xil_axi_uint slave_moniter_transaction_queue_size =0;
axi_monitor_transaction slv_scb_transaction;
xil_axi_uint mst_agent_verbosity = 0;
xil_axi_uint slv_agent_verbosity = 0;
xil_axi_uint passthrough_agent_verbosity = 0;
bit clock;
bit reset;
integer result_slave;
bit [31:0] S00_AXI_test_data[3:0];
localparam LC_AXI_BURST_LENGTH = 8;
localparam LC_AXI_DATA_WIDTH = 32;
task automatic COMPARE_DATA;
input [(LC_AXI_BURST_LENGTH * LC_AXI_DATA_WIDTH)-1:0]expected;
input [(LC_AXI_BURST_LENGTH * LC_AXI_DATA_WIDTH)-1:0]actual;
begin
if (expected === 'hx || actual === 'hx) begin
$display("TESTBENCH ERROR! COMPARE_DATA cannot be performed with an expected or actual vector that is all 'x'!");
result_slave = 0; $stop;
end
if (actual != expected) begin
$display("TESTBENCH ERROR! Data expected is not equal to actual.", " expected = 0x%h",expected, " actual = 0x%h",actual);
result_slave = 0;
$stop;
end
else
begin
$display("TESTBENCH Passed! Data expected is equal to actual.",
" expected = 0x%h",expected, " actual = 0x%h",actual);
end
end
endtask
integer i;
integer j;
xil_axi_uint trans_cnt_before_switch = 48;
xil_axi_uint passthrough_cmd_switch_cnt = 0;
event passthrough_mastermode_start_event;
event passthrough_mastermode_end_event;
event passthrough_slavemode_end_event;
xil_axi_uint mtestID;
xil_axi_ulong mtestADDR;
xil_axi_len_t mtestBurstLength;
xil_axi_size_t mtestDataSize;
xil_axi_burst_t mtestBurstType;
xil_axi_lock_t mtestLOCK;
xil_axi_cache_t mtestCacheType = 0;
xil_axi_prot_t mtestProtectionType = 3'b000;
xil_axi_region_t mtestRegion = 4'b000;
xil_axi_qos_t mtestQOS = 4'b000;
xil_axi_data_beat dbeat;
xil_axi_data_beat [255:0] mtestWUSER;
xil_axi_data_beat mtestAWUSER = 'h0;
xil_axi_data_beat mtestARUSER = 0;
xil_axi_data_beat [255:0] mtestRUSER;
xil_axi_uint mtestBUSER = 0;
xil_axi_resp_t mtestBresp;
xil_axi_resp_t[255:0] mtestRresp;
bit [63:0] mtestWDataL;
bit [63:0] mtestRDataL;
axi_transaction pss_wr_transaction;
axi_transaction pss_rd_transaction;
axi_transaction reactive_transaction;
axi_transaction rd_payload_transaction;
axi_transaction wr_rand;
axi_transaction rd_rand;
axi_transaction wr_reactive;
axi_transaction rd_reactive;
axi_transaction wr_reactive2;
axi_transaction rd_reactive2;
axi_ready_gen bready_gen;
axi_ready_gen rready_gen;
axi_ready_gen awready_gen;
axi_ready_gen wready_gen;
axi_ready_gen arready_gen;
axi_ready_gen bready_gen2;
axi_ready_gen rready_gen2;
axi_ready_gen awready_gen2;
axi_ready_gen wready_gen2;
axi_ready_gen arready_gen2;
xil_axi_payload_byte data_mem[xil_axi_ulong];
axi_lite_para24_v1_0_bfm_1_master_0_0_mst_t mst_agent_0;
`BD_WRAPPER DUT(
.ARESETN(reset),
.ACLK(clock)
);
initial begin
mst_agent_0 = new("master vip agent",DUT.`BD_INST_NAME.master_0.inst.IF);//ms
mst_agent_0.vif_proxy.set_dummy_drive_type(XIL_AXI_VIF_DRIVE_NONE);
mst_agent_0.set_agent_tag("Master VIP");
mst_agent_0.set_verbosity(mst_agent_verbosity);
mst_agent_0.start_master();
$timeformat (-12, 1, " ps", 1);
end
initial begin
reset <= 1'b0;
#200ns;
reset <= 1'b1;
repeat (5) @(negedge clock);
end
always #5 clock <= ~clock;
initial begin
S_AXI_TEST ( );
#1ns;
$finish;
end
task automatic S_AXI_TEST;
begin
#1;
$display("Sequential write transfers example similar to AXI BFM WRITE_BURST method starts");
mtestID = 0;
mtestADDR = 64'h00000000;
mtestBurstLength = 0;
mtestDataSize = xil_axi_size_t'(xil_clog2(32/8));
mtestBurstType = XIL_AXI_BURST_TYPE_INCR;
mtestLOCK = XIL_AXI_ALOCK_NOLOCK;
mtestCacheType = 0;
mtestProtectionType = 0;
mtestRegion = 0;
mtestQOS = 0;
result_slave = 1;
mtestWDataL[31:0] = 32'h00000001;
for(int i = 0; i < 4;i++) begin
S00_AXI_test_data[i] <= mtestWDataL[31:0];
mst_agent_0.AXI4LITE_WRITE_BURST(
mtestADDR,
mtestProtectionType,
mtestWDataL,
mtestBresp
);
mtestWDataL[31:0] = mtestWDataL[31:0] + 1;
mtestADDR = mtestADDR + 64'h4;
end
$display("Sequential write transfers example similar to AXI BFM WRITE_BURST method completes");
$display("Sequential read transfers example similar to AXI BFM READ_BURST method starts");
mtestID = 0;
mtestADDR = 64'h00000000;
mtestBurstLength = 0;
mtestDataSize = xil_axi_size_t'(xil_clog2(32/8));
mtestBurstType = XIL_AXI_BURST_TYPE_INCR;
mtestLOCK = XIL_AXI_ALOCK_NOLOCK;
mtestCacheType = 0;
mtestProtectionType = 0;
mtestRegion = 0;
mtestQOS = 0;
for(int i = 0; i < 4;i++) begin
mst_agent_0.AXI4LITE_READ_BURST(
mtestADDR,
mtestProtectionType,
mtestRDataL,
mtestRresp
);
mtestADDR = mtestADDR + 64'h4;
COMPARE_DATA(S00_AXI_test_data[i],mtestRDataL);
end
$display("Sequential read transfers example similar to AXI BFM READ_BURST method completes");
$display("Sequential read transfers example similar to AXI VIP READ_BURST method completes");
$display("---------------------------------------------------------");
$display("EXAMPLE TEST S00_AXI: PTGEN_TEST_FINISHED!");
if ( result_slave ) begin
$display("PTGEN_TEST: PASSED!");
end else begin
$display("PTGEN_TEST: FAILED!");
end
$display("---------------------------------------------------------");
end
endtask
endmodule
FPGA/ip_repo/axi_lite_para24_1_0/example_designs/bfm_design/design.tcl 0 → 100644
View file @ 61b62b1f
proc create_ipi_design { offsetfile design_name } {
create_bd_design $design_name
open_bd_design $design_name
# Create Clock and Reset Ports
set ACLK [ create_bd_port -dir I -type clk ACLK ]
set_property -dict [ list CONFIG.FREQ_HZ {100000000} CONFIG.PHASE {0.000} CONFIG.CLK_DOMAIN "${design_name}_ACLK" ] $ACLK
set ARESETN [ create_bd_port -dir I -type rst ARESETN ]
set_property -dict [ list CONFIG.POLARITY {ACTIVE_LOW} ] $ARESETN
set_property CONFIG.ASSOCIATED_RESET ARESETN $ACLK
# Create instance: axi_lite_para24_0, and set properties
set axi_lite_para24_0 [ create_bd_cell -type ip -vlnv xilinx.com:user:axi_lite_para24:1.0 axi_lite_para24_0]
# Create instance: master_0, and set properties
set master_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_vip master_0]
set_property -dict [ list CONFIG.PROTOCOL {AXI4LITE} CONFIG.INTERFACE_MODE {MASTER} ] $master_0
# Create interface connections
connect_bd_intf_net [get_bd_intf_pins master_0/M_AXI ] [get_bd_intf_pins axi_lite_para24_0/S00_AXI]
# Create port connections
connect_bd_net -net aclk_net [get_bd_ports ACLK] [get_bd_pins master_0/ACLK] [get_bd_pins axi_lite_para24_0/S00_AXI_ACLK]
connect_bd_net -net aresetn_net [get_bd_ports ARESETN] [get_bd_pins master_0/ARESETN] [get_bd_pins axi_lite_para24_0/S00_AXI_ARESETN]
set_property target_simulator XSim [current_project]
set_property -name {xsim.simulate.runtime} -value {100ms} -objects [get_filesets sim_1]
# Auto assign address
assign_bd_address
# Copy all address to interface_address.vh file
set bd_path [file dirname [get_property NAME [get_files ${design_name}.bd]]]
upvar 1 $offsetfile offset_file
set offset_file "${bd_path}/axi_lite_para24_v1_0_tb_include.svh"
set fp [open $offset_file "w"]
puts $fp "`ifndef axi_lite_para24_v1_0_tb_include_vh_"
puts $fp "`define axi_lite_para24_v1_0_tb_include_vh_\n"
puts $fp "//Configuration current bd names"
puts $fp "`define BD_NAME ${design_name}"
puts $fp "`define BD_INST_NAME ${design_name}_i"
puts $fp "`define BD_WRAPPER ${design_name}_wrapper\n"
puts $fp "//Configuration address parameters"
puts $fp "`endif"
close $fp
}
set ip_path [file dirname [file normalize [get_property XML_FILE_NAME [ipx::get_cores xilinx.com:user:axi_lite_para24:1.0]]]]
set test_bench_file ${ip_path}/example_designs/bfm_design/axi_lite_para24_v1_0_tb.sv
set interface_address_vh_file ""
# Set IP Repository and Update IP Catalogue
set repo_paths [get_property ip_repo_paths [current_fileset]]
if { [lsearch -exact -nocase $repo_paths $ip_path ] == -1 } {
set_property ip_repo_paths "$ip_path [get_property ip_repo_paths [current_fileset]]" [current_fileset]
update_ip_catalog
}
set design_name ""
set all_bd {}
set all_bd_files [get_files *.bd -quiet]
foreach file $all_bd_files {
set file_name [string range $file [expr {[string last "/" $file] + 1}] end]
set bd_name [string range $file_name 0 [expr {[string last "." $file_name] -1}]]
lappend all_bd $bd_name
}
for { set i 1 } { 1 } { incr i } {
set design_name "axi_lite_para24_v1_0_bfm_${i}"
if { [lsearch -exact -nocase $all_bd $design_name ] == -1 } {
break
}
}
create_ipi_design interface_address_vh_file ${design_name}
validate_bd_design
set wrapper_file [make_wrapper -files [get_files ${design_name}.bd] -top -force]
import_files -force -norecurse $wrapper_file
set_property SOURCE_SET sources_1 [get_filesets sim_1]
import_files -fileset sim_1 -norecurse -force $test_bench_file
remove_files -quiet -fileset sim_1 axi_lite_para24_v1_0_tb_include.vh
import_files -fileset sim_1 -norecurse -force $interface_address_vh_file
set_property top axi_lite_para24_v1_0_tb [get_filesets sim_1]
set_property top_lib {} [get_filesets sim_1]
set_property top_file {} [get_filesets sim_1]
launch_simulation -simset sim_1 -mode behavioral
FPGA/ip_repo/axi_lite_para24_1_0/example_designs/debug_hw_design/axi_lite_para24_v1_0_hw_test.tcl 0 → 100644
View file @ 61b62b1f
# Runtime Tcl commands to interact with - axi_lite_para24_v1_0
# Sourcing design address info tcl
set bd_path [get_property DIRECTORY [current_project]]/[current_project].srcs/[current_fileset]/bd
source ${bd_path}/axi_lite_para24_v1_0_include.tcl
# jtag axi master interface hardware name, change as per your design.
set jtag_axi_master hw_axi_1
set ec 0
# hw test script
# Delete all previous axis transactions
if { [llength [get_hw_axi_txns -quiet]] } {
delete_hw_axi_txn [get_hw_axi_txns -quiet]
}
# Test all lite slaves.
set wdata_1 abcd1234
# Test: S00_AXI
# Create a write transaction at s00_axi_addr address
create_hw_axi_txn w_s00_axi_addr [get_hw_axis $jtag_axi_master] -type write -address $s00_axi_addr -data $wdata_1
# Create a read transaction at s00_axi_addr address
create_hw_axi_txn r_s00_axi_addr [get_hw_axis $jtag_axi_master] -type read -address $s00_axi_addr
# Initiate transactions
run_hw_axi r_s00_axi_addr
run_hw_axi w_s00_axi_addr
run_hw_axi r_s00_axi_addr
set rdata_tmp [get_property DATA [get_hw_axi_txn r_s00_axi_addr]]
# Compare read data
if { $rdata_tmp == $wdata_1 } {
puts "Data comparison test pass for - S00_AXI"
} else {
puts "Data comparison test fail for - S00_AXI, expected-$wdata_1 actual-$rdata_tmp"
inc ec
}
# Check error flag
if { $ec == 0 } {
puts "PTGEN_TEST: PASSED!"
} else {
puts "PTGEN_TEST: FAILED!"
}
FPGA/ip_repo/axi_lite_para24_1_0/example_designs/debug_hw_design/design.tcl 0 → 100644
View file @ 61b62b1f
proc create_ipi_design { offsetfile design_name } {
create_bd_design $design_name
open_bd_design $design_name
# Create and configure Clock/Reset
create_bd_cell -type ip -vlnv xilinx.com:ip:clk_wiz sys_clk_0
create_bd_cell -type ip -vlnv xilinx.com:ip:proc_sys_reset sys_reset_0
#Constraints will be provided manually while pin planning.
create_bd_port -dir I -type rst reset_rtl
set_property CONFIG.POLARITY [get_property CONFIG.POLARITY [get_bd_pins sys_clk_0/reset]] [get_bd_ports reset_rtl]
connect_bd_net [get_bd_pins sys_reset_0/ext_reset_in] [get_bd_ports reset_rtl]
connect_bd_net [get_bd_ports reset_rtl] [get_bd_pins sys_clk_0/reset]
set external_reset_port reset_rtl
create_bd_port -dir I -type clk clock_rtl
connect_bd_net [get_bd_pins sys_clk_0/clk_in1] [get_bd_ports clock_rtl]
set external_clock_port clock_rtl
#Avoid IPI DRC, make clock port synchronous to reset
if { $external_clock_port ne "" && $external_reset_port ne "" } {
set_property CONFIG.ASSOCIATED_RESET $external_reset_port [get_bd_ports $external_clock_port]
}
# Connect other sys_reset pins
connect_bd_net [get_bd_pins sys_reset_0/slowest_sync_clk] [get_bd_pins sys_clk_0/clk_out1]
connect_bd_net [get_bd_pins sys_clk_0/locked] [get_bd_pins sys_reset_0/dcm_locked]
# Create instance: axi_lite_para24_0, and set properties
set axi_lite_para24_0 [ create_bd_cell -type ip -vlnv xilinx.com:user:axi_lite_para24:1.0 axi_lite_para24_0 ]
# Create instance: jtag_axi_0, and set properties
set jtag_axi_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:jtag_axi jtag_axi_0 ]
set_property -dict [list CONFIG.PROTOCOL {0}] [get_bd_cells jtag_axi_0]
connect_bd_net [get_bd_pins jtag_axi_0/aclk] [get_bd_pins sys_clk_0/clk_out1]
connect_bd_net [get_bd_pins jtag_axi_0/aresetn] [get_bd_pins sys_reset_0/peripheral_aresetn]
# Create instance: axi_peri_interconnect, and set properties
set axi_peri_interconnect [ create_bd_cell -type ip -vlnv xilinx.com:ip:axi_interconnect axi_peri_interconnect ]
connect_bd_net [get_bd_pins axi_peri_interconnect/ACLK] [get_bd_pins sys_clk_0/clk_out1]
connect_bd_net [get_bd_pins axi_peri_interconnect/ARESETN] [get_bd_pins sys_reset_0/interconnect_aresetn]
set_property -dict [ list CONFIG.NUM_SI {1} ] $axi_peri_interconnect
connect_bd_net [get_bd_pins axi_peri_interconnect/S00_ACLK] [get_bd_pins sys_clk_0/clk_out1]
connect_bd_net [get_bd_pins axi_peri_interconnect/S00_ARESETN] [get_bd_pins sys_reset_0/peripheral_aresetn]
connect_bd_intf_net [get_bd_intf_pins jtag_axi_0/M_AXI] [get_bd_intf_pins axi_peri_interconnect/S00_AXI]
set_property -dict [ list CONFIG.NUM_MI {1} ] $axi_peri_interconnect
connect_bd_net [get_bd_pins axi_peri_interconnect/M00_ACLK] [get_bd_pins sys_clk_0/clk_out1]
connect_bd_net [get_bd_pins axi_peri_interconnect/M00_ARESETN] [get_bd_pins sys_reset_0/peripheral_aresetn]
# Connect all clock & reset of axi_lite_para24_0 slave interfaces..
connect_bd_intf_net [get_bd_intf_pins axi_peri_interconnect/M00_AXI] [get_bd_intf_pins axi_lite_para24_0/S00_AXI]
connect_bd_net [get_bd_pins axi_lite_para24_0/s00_axi_aclk] [get_bd_pins sys_clk_0/clk_out1]
connect_bd_net [get_bd_pins axi_lite_para24_0/s00_axi_aresetn] [get_bd_pins sys_reset_0/peripheral_aresetn]
# Auto assign address
assign_bd_address
# Copy all address to axi_lite_para24_v1_0_include.tcl file
set bd_path [get_property DIRECTORY [current_project]]/[current_project].srcs/[current_fileset]/bd
upvar 1 $offsetfile offset_file
set offset_file "${bd_path}/axi_lite_para24_v1_0_include.tcl"
set fp [open $offset_file "w"]
puts $fp "# Configuration address parameters"
set offset [get_property OFFSET [get_bd_addr_segs /jtag_axi_0/Data/SEG_axi_lite_para24_0_S00_AXI_* ]]
puts $fp "set s00_axi_addr ${offset}"
close $fp
}
# Set IP Repository and Update IP Catalogue
set ip_path [file dirname [file normalize [get_property XML_FILE_NAME [ipx::get_cores xilinx.com:user:axi_lite_para24:1.0]]]]
set hw_test_file ${ip_path}/example_designs/debug_hw_design/axi_lite_para24_v1_0_hw_test.tcl
set repo_paths [get_property ip_repo_paths [current_fileset]]
if { [lsearch -exact -nocase $repo_paths $ip_path ] == -1 } {
set_property ip_repo_paths "$ip_path [get_property ip_repo_paths [current_fileset]]" [current_fileset]
update_ip_catalog
}
set design_name ""
set all_bd {}
set all_bd_files [get_files *.bd -quiet]
foreach file $all_bd_files {
set file_name [string range $file [expr {[string last "/" $file] + 1}] end]
set bd_name [string range $file_name 0 [expr {[string last "." $file_name] -1}]]
lappend all_bd $bd_name
}
for { set i 1 } { 1 } { incr i } {
set design_name "axi_lite_para24_v1_0_hw_${i}"
if { [lsearch -exact -nocase $all_bd $design_name ] == -1 } {
break
}
}
set intf_address_include_file ""
create_ipi_design intf_address_include_file ${design_name}
save_bd_design
validate_bd_design
set wrapper_file [make_wrapper -files [get_files ${design_name}.bd] -top -force]
import_files -force -norecurse $wrapper_file
puts "-------------------------------------------------------------------------------------------------"
puts "INFO NEXT STEPS : Until this stage, debug hardware design has been created, "
puts " please perform following steps to test design in targeted board."
puts "1. Generate bitstream"
puts "2. Setup your targeted board, open hardware manager and open new(or existing) hardware target"
puts "3. Download generated bitstream"
puts "4. Run generated hardware test using below command, this invokes basic read/write operation"
puts " to every interface present in the peripheral : xilinx.com:user:myip:1.0"
puts " : source -notrace ${hw_test_file}"
puts "-------------------------------------------------------------------------------------------------"
FPGA/ip_repo/axi_lite_para24_1_0/hdl/axi_lite_para24_v1_0.v 0 → 100644
View file @ 61b62b1f
`timescale 1 ns / 1 ps
module axi_lite_para24_v1_0 #
(
// Users to add parameters here
// User parameters ends
// Do not modify the parameters beyond this line
// Parameters of Axi Slave Bus Interface S00_AXI
parameter integer C_S00_AXI_DATA_WIDTH = 32,
parameter integer C_S00_AXI_ADDR_WIDTH = 7
)
(
// Users to add ports here
input dma_start,
input [3:0] card_state1, //20250422 add
input [3:0] card_state2,
input [3:0] card_state3,
input [3:0] card_state4,
input [3:0] card_state5,
input [3:0] card_state6,
output [31:0]sample_rate,
output [31:0]total_sample_num,
output [31:0]sample_num,
output [31:0]channel_mask1,
output [31:0]channel_mask2,
output [31:0]channel_mask3,
output [31:0]channel_mask4,
output [31:0]channel_mask5,
output [31:0]channel_mask6,
output [7:0]sample_coef,
output [7:0]job_id,
output [7:0]stream_mode,
output led_lite,
output [31:0]dest_ip,// 20250311 add
output static_arp,
output [47:0] static_dest_mac, // 20250912 add
// User ports ends
// Do not modify the ports beyond this line
// Ports of Axi Slave Bus Interface S00_AXI
input wire s00_axi_aclk,
input wire s00_axi_aresetn,
input wire [C_S00_AXI_ADDR_WIDTH-1 : 0] s00_axi_awaddr,
input wire [2 : 0] s00_axi_awprot,
input wire s00_axi_awvalid,
output wire s00_axi_awready,
input wire [C_S00_AXI_DATA_WIDTH-1 : 0] s00_axi_wdata,
input wire [(C_S00_AXI_DATA_WIDTH/8)-1 : 0] s00_axi_wstrb,
input wire s00_axi_wvalid,
output wire s00_axi_wready,
output wire [1 : 0] s00_axi_bresp,
output wire s00_axi_bvalid,
input wire s00_axi_bready,
input wire [C_S00_AXI_ADDR_WIDTH-1 : 0] s00_axi_araddr,
input wire [2 : 0] s00_axi_arprot,
input wire s00_axi_arvalid,
output wire s00_axi_arready,
output wire [C_S00_AXI_DATA_WIDTH-1 : 0] s00_axi_rdata,
output wire [1 : 0] s00_axi_rresp,
output wire s00_axi_rvalid,
input wire s00_axi_rready
);
// Instantiation of Axi Bus Interface S00_AXI
axi_lite_para24_v1_0_S00_AXI # (
.C_S_AXI_DATA_WIDTH(C_S00_AXI_DATA_WIDTH),
.C_S_AXI_ADDR_WIDTH(C_S00_AXI_ADDR_WIDTH)
) axi_lite_para24_v1_0_S00_AXI_inst (
.S_AXI_ACLK(s00_axi_aclk),
.S_AXI_ARESETN(s00_axi_aresetn),
.S_AXI_AWADDR(s00_axi_awaddr),
.S_AXI_AWPROT(s00_axi_awprot),
.S_AXI_AWVALID(s00_axi_awvalid),
.S_AXI_AWREADY(s00_axi_awready),
.S_AXI_WDATA(s00_axi_wdata),
.S_AXI_WSTRB(s00_axi_wstrb),
.S_AXI_WVALID(s00_axi_wvalid),
.S_AXI_WREADY(s00_axi_wready),
.S_AXI_BRESP(s00_axi_bresp),
.S_AXI_BVALID(s00_axi_bvalid),
.S_AXI_BREADY(s00_axi_bready),
.S_AXI_ARADDR(s00_axi_araddr),
.S_AXI_ARPROT(s00_axi_arprot),
.S_AXI_ARVALID(s00_axi_arvalid),
.S_AXI_ARREADY(s00_axi_arready),
.S_AXI_RDATA(s00_axi_rdata),
.S_AXI_RRESP(s00_axi_rresp),
.S_AXI_RVALID(s00_axi_rvalid),
.S_AXI_RREADY(s00_axi_rready),
.card_state1(card_state1),
.card_state2(card_state2),
.card_state3(card_state3),
.card_state4(card_state4),
.card_state5(card_state5),
.card_state6(card_state6),
.sample_rate(sample_rate),
.total_sample_num(total_sample_num),
.sample_num(sample_num),
.channel_mask1(channel_mask1),
.channel_mask2(channel_mask2),
.channel_mask3(channel_mask3),
.channel_mask4(channel_mask4),
.channel_mask5(channel_mask5),
.channel_mask6(channel_mask6),
.sample_coef(sample_coef),
.job_id(job_id),
.stream_mode(stream_mode),
.dma_start(dma_start),
.led_lite(led_lite),
.dest_ip(dest_ip),
.static_arp(static_arp),
.static_dest_mac(static_dest_mac)
);
// Add user logic here
// User logic ends
endmodule
FPGA/ip_repo/axi_lite_para24_1_0/hdl/axi_lite_para24_v1_0_S00_AXI.v 0 → 100644
View file @ 61b62b1f
`timescale 1 ns / 1 ps
module axi_lite_para24_v1_0_S00_AXI #
(
// Users to add parameters here
// User parameters ends
// Do not modify the parameters beyond this line
// Width of S_AXI data bus
parameter integer C_S_AXI_DATA_WIDTH = 32,
// Width of S_AXI address bus
parameter integer C_S_AXI_ADDR_WIDTH = 7
)
(
// Users to add ports here
input dma_start,
input [3:0] card_state1, //20250422 add
input [3:0] card_state2,
input [3:0] card_state3,
input [3:0] card_state4,
input [3:0] card_state5,
input [3:0] card_state6,
output [31:0]sample_rate,
output [31:0]total_sample_num,
output [31:0]sample_num,
output [31:0]channel_mask1,
output [31:0]channel_mask2,
output [31:0]channel_mask3,
output [31:0]channel_mask4,
output [31:0]channel_mask5,
output [31:0]channel_mask6,
output [7:0]sample_coef,
output [7:0]job_id,
output [7:0]stream_mode,
output led_lite,
output [31:0]dest_ip,// 20250311 add
output static_arp,
output [47:0] static_dest_mac, // 20250912 add
// User ports ends
// Do not modify the ports beyond this line
// Global Clock Signal
input wire S_AXI_ACLK,
// Global Reset Signal. This Signal is Active LOW
input wire S_AXI_ARESETN,
// Write address (issued by master, acceped by Slave)
input wire [C_S_AXI_ADDR_WIDTH-1 : 0] S_AXI_AWADDR,
// Write channel Protection type. This signal indicates the
// privilege and security level of the transaction, and whether
// the transaction is a data access or an instruction access.
input wire [2 : 0] S_AXI_AWPROT,
// Write address valid. This signal indicates that the master signaling
// valid write address and control information.
input wire S_AXI_AWVALID,
// Write address ready. This signal indicates that the slave is ready
// to accept an address and associated control signals.
output wire S_AXI_AWREADY,
// Write data (issued by master, acceped by Slave)
input wire [C_S_AXI_DATA_WIDTH-1 : 0] S_AXI_WDATA,
// Write strobes. This signal indicates which byte lanes hold
// valid data. There is one write strobe bit for each eight
// bits of the write data bus.
input wire [(C_S_AXI_DATA_WIDTH/8)-1 : 0] S_AXI_WSTRB,
// Write valid. This signal indicates that valid write
// data and strobes are available.
input wire S_AXI_WVALID,
// Write ready. This signal indicates that the slave
// can accept the write data.
output wire S_AXI_WREADY,
// Write response. This signal indicates the status
// of the write transaction.
output wire [1 : 0] S_AXI_BRESP,
// Write response valid. This signal indicates that the channel
// is signaling a valid write response.
output wire S_AXI_BVALID,
// Response ready. This signal indicates that the master
// can accept a write response.
input wire S_AXI_BREADY,
// Read address (issued by master, acceped by Slave)
input wire [C_S_AXI_ADDR_WIDTH-1 : 0] S_AXI_ARADDR,
// Protection type. This signal indicates the privilege
// and security level of the transaction, and whether the
// transaction is a data access or an instruction access.
input wire [2 : 0] S_AXI_ARPROT,
// Read address valid. This signal indicates that the channel
// is signaling valid read address and control information.
input wire S_AXI_ARVALID,
// Read address ready. This signal indicates that the slave is
// ready to accept an address and associated control signals.
output wire S_AXI_ARREADY,
// Read data (issued by slave)
output wire [C_S_AXI_DATA_WIDTH-1 : 0] S_AXI_RDATA,
// Read response. This signal indicates the status of the
// read transfer.
output wire [1 : 0] S_AXI_RRESP,
// Read valid. This signal indicates that the channel is
// signaling the required read data.
output wire S_AXI_RVALID,
// Read ready. This signal indicates that the master can
// accept the read data and response information.
input wire S_AXI_RREADY
);
// AXI4LITE signals
reg [C_S_AXI_ADDR_WIDTH-1 : 0] axi_awaddr;
reg axi_awready;
reg axi_wready;
reg [1 : 0] axi_bresp;
reg axi_bvalid;
reg [C_S_AXI_ADDR_WIDTH-1 : 0] axi_araddr;
reg axi_arready;
reg [C_S_AXI_DATA_WIDTH-1 : 0] axi_rdata;
reg [1 : 0] axi_rresp;
reg axi_rvalid;
// Example-specific design signals
// local parameter for addressing 32 bit / 64 bit C_S_AXI_DATA_WIDTH
// ADDR_LSB is used for addressing 32/64 bit registers/memories
// ADDR_LSB = 2 for 32 bits (n downto 2)
// ADDR_LSB = 3 for 64 bits (n downto 3)
localparam integer ADDR_LSB = (C_S_AXI_DATA_WIDTH/32) + 1;
localparam integer OPT_MEM_ADDR_BITS = 4;
//----------------------------------------------
//-- Signals for user logic register space example
//------------------------------------------------
//-- Number of Slave Registers 24
reg [C_S_AXI_DATA_WIDTH-1:0] slv_reg0;
reg [C_S_AXI_DATA_WIDTH-1:0] slv_reg1;
reg [C_S_AXI_DATA_WIDTH-1:0] slv_reg2;
reg [C_S_AXI_DATA_WIDTH-1:0] slv_reg3;
reg [C_S_AXI_DATA_WIDTH-1:0] slv_reg4;
reg [C_S_AXI_DATA_WIDTH-1:0] slv_reg5;
reg [C_S_AXI_DATA_WIDTH-1:0] slv_reg6;
reg [C_S_AXI_DATA_WIDTH-1:0] slv_reg7;
reg [C_S_AXI_DATA_WIDTH-1:0] slv_reg8;
reg [C_S_AXI_DATA_WIDTH-1:0] slv_reg9;
reg [C_S_AXI_DATA_WIDTH-1:0] slv_reg10;
reg [C_S_AXI_DATA_WIDTH-1:0] slv_reg11;
reg [C_S_AXI_DATA_WIDTH-1:0] slv_reg12;
reg [C_S_AXI_DATA_WIDTH-1:0] slv_reg13;
reg [C_S_AXI_DATA_WIDTH-1:0] slv_reg14;
reg [C_S_AXI_DATA_WIDTH-1:0] slv_reg15;
reg [C_S_AXI_DATA_WIDTH-1:0] slv_reg16;
reg [C_S_AXI_DATA_WIDTH-1:0] slv_reg17;
reg [C_S_AXI_DATA_WIDTH-1:0] slv_reg18;
reg [C_S_AXI_DATA_WIDTH-1:0] slv_reg19;
reg [C_S_AXI_DATA_WIDTH-1:0] slv_reg20;
reg [C_S_AXI_DATA_WIDTH-1:0] slv_reg21;
reg [C_S_AXI_DATA_WIDTH-1:0] slv_reg22;
reg [C_S_AXI_DATA_WIDTH-1:0] slv_reg23;
wire slv_reg_rden;
wire slv_reg_wren;
reg [C_S_AXI_DATA_WIDTH-1:0] reg_data_out;
integer byte_index;
reg aw_en;
// I/O Connections assignments
assign S_AXI_AWREADY = axi_awready;
assign S_AXI_WREADY = axi_wready;
assign S_AXI_BRESP = axi_bresp;
assign S_AXI_BVALID = axi_bvalid;
assign S_AXI_ARREADY = axi_arready;
assign S_AXI_RDATA = axi_rdata;
assign S_AXI_RRESP = axi_rresp;
assign S_AXI_RVALID = axi_rvalid;
// Implement axi_awready generation
// axi_awready is asserted for one S_AXI_ACLK clock cycle when both
// S_AXI_AWVALID and S_AXI_WVALID are asserted. axi_awready is
// de-asserted when reset is low.
always @( posedge S_AXI_ACLK )
begin
if ( S_AXI_ARESETN == 1'b0 )
begin
axi_awready <= 1'b0;
aw_en <= 1'b1;
end
else
begin
if (~axi_awready && S_AXI_AWVALID && S_AXI_WVALID && aw_en)
begin
// slave is ready to accept write address when
// there is a valid write address and write data
// on the write address and data bus. This design
// expects no outstanding transactions.
axi_awready <= 1'b1;
aw_en <= 1'b0;
end
else if (S_AXI_BREADY && axi_bvalid)
begin
aw_en <= 1'b1;
axi_awready <= 1'b0;
end
else
begin
axi_awready <= 1'b0;
end
end
end
// Implement axi_awaddr latching
// This process is used to latch the address when both
// S_AXI_AWVALID and S_AXI_WVALID are valid.
always @( posedge S_AXI_ACLK )
begin
if ( S_AXI_ARESETN == 1'b0 )
begin
axi_awaddr <= 0;
end
else
begin
if (~axi_awready && S_AXI_AWVALID && S_AXI_WVALID && aw_en)
begin
// Write Address latching
axi_awaddr <= S_AXI_AWADDR;
end
end
end
// Implement axi_wready generation
// axi_wready is asserted for one S_AXI_ACLK clock cycle when both
// S_AXI_AWVALID and S_AXI_WVALID are asserted. axi_wready is
// de-asserted when reset is low.
always @( posedge S_AXI_ACLK )
begin
if ( S_AXI_ARESETN == 1'b0 )
begin
axi_wready <= 1'b0;
end
else
begin
if (~axi_wready && S_AXI_WVALID && S_AXI_AWVALID && aw_en )
begin
// slave is ready to accept write data when
// there is a valid write address and write data
// on the write address and data bus. This design
// expects no outstanding transactions.
axi_wready <= 1'b1;
end
else
begin
axi_wready <= 1'b0;
end
end
end
// Implement memory mapped register select and write logic generation
// The write data is accepted and written to memory mapped registers when
// axi_awready, S_AXI_WVALID, axi_wready and S_AXI_WVALID are asserted. Write strobes are used to
// select byte enables of slave registers while writing.
// These registers are cleared when reset (active low) is applied.
// Slave register write enable is asserted when valid address and data are available
// and the slave is ready to accept the write address and write data.
assign slv_reg_wren = axi_wready && S_AXI_WVALID && axi_awready && S_AXI_AWVALID;
always @( posedge S_AXI_ACLK )
begin
if ( S_AXI_ARESETN == 1'b0 )
begin
slv_reg0 <= 0;
slv_reg1 <= 0;
slv_reg2 <= 0;
slv_reg3 <= 0;
slv_reg4 <= 0;
slv_reg5 <= 0;
slv_reg6 <= 0;
slv_reg7 <= 0;
slv_reg8 <= 0;
slv_reg9 <= 0;
slv_reg10 <= 0;
slv_reg11 <= 0;
slv_reg12 <= 0;
slv_reg13 <= 0;
slv_reg14 <= 0;
slv_reg15 <= 0;
slv_reg16 <= 0;
slv_reg17 <= 0;
slv_reg18 <= 0;
slv_reg19 <= 0;
slv_reg20 <= 0;
slv_reg21 <= 0;
slv_reg22 <= 0;
slv_reg23 <= 0;
end
else begin
if (slv_reg_wren)
begin
case ( axi_awaddr[ADDR_LSB+OPT_MEM_ADDR_BITS:ADDR_LSB] )
5'h00:
for ( byte_index = 0; byte_index <= (C_S_AXI_DATA_WIDTH/8)-1; byte_index = byte_index+1 )
if ( S_AXI_WSTRB[byte_index] == 1 ) begin
// Respective byte enables are asserted as per write strobes
// Slave register 0
slv_reg0[(byte_index*8) +: 8] <= S_AXI_WDATA[(byte_index*8) +: 8];
end
5'h01:
for ( byte_index = 0; byte_index <= (C_S_AXI_DATA_WIDTH/8)-1; byte_index = byte_index+1 )
if ( S_AXI_WSTRB[byte_index] == 1 ) begin
// Respective byte enables are asserted as per write strobes
// Slave register 1
slv_reg1[(byte_index*8) +: 8] <= S_AXI_WDATA[(byte_index*8) +: 8];
end
5'h02:
for ( byte_index = 0; byte_index <= (C_S_AXI_DATA_WIDTH/8)-1; byte_index = byte_index+1 )
if ( S_AXI_WSTRB[byte_index] == 1 ) begin
// Respective byte enables are asserted as per write strobes
// Slave register 2
slv_reg2[(byte_index*8) +: 8] <= S_AXI_WDATA[(byte_index*8) +: 8];
end
5'h03:
for ( byte_index = 0; byte_index <= (C_S_AXI_DATA_WIDTH/8)-1; byte_index = byte_index+1 )
if ( S_AXI_WSTRB[byte_index] == 1 ) begin
// Respective byte enables are asserted as per write strobes
// Slave register 3
slv_reg3[(byte_index*8) +: 8] <= S_AXI_WDATA[(byte_index*8) +: 8];
end
5'h04:
for ( byte_index = 0; byte_index <= (C_S_AXI_DATA_WIDTH/8)-1; byte_index = byte_index+1 )
if ( S_AXI_WSTRB[byte_index] == 1 ) begin
// Respective byte enables are asserted as per write strobes
// Slave register 4
slv_reg4[(byte_index*8) +: 8] <= S_AXI_WDATA[(byte_index*8) +: 8];
end
5'h05:
for ( byte_index = 0; byte_index <= (C_S_AXI_DATA_WIDTH/8)-1; byte_index = byte_index+1 )
if ( S_AXI_WSTRB[byte_index] == 1 ) begin
// Respective byte enables are asserted as per write strobes
// Slave register 5
slv_reg5[(byte_index*8) +: 8] <= S_AXI_WDATA[(byte_index*8) +: 8];
end
5'h06:
for ( byte_index = 0; byte_index <= (C_S_AXI_DATA_WIDTH/8)-1; byte_index = byte_index+1 )
if ( S_AXI_WSTRB[byte_index] == 1 ) begin
// Respective byte enables are asserted as per write strobes
// Slave register 6
slv_reg6[(byte_index*8) +: 8] <= S_AXI_WDATA[(byte_index*8) +: 8];
end
5'h07:
for ( byte_index = 0; byte_index <= (C_S_AXI_DATA_WIDTH/8)-1; byte_index = byte_index+1 )
if ( S_AXI_WSTRB[byte_index] == 1 ) begin
// Respective byte enables are asserted as per write strobes
// Slave register 7
slv_reg7[(byte_index*8) +: 8] <= S_AXI_WDATA[(byte_index*8) +: 8];
end
5'h08:
for ( byte_index = 0; byte_index <= (C_S_AXI_DATA_WIDTH/8)-1; byte_index = byte_index+1 )
if ( S_AXI_WSTRB[byte_index] == 1 ) begin
// Respective byte enables are asserted as per write strobes
// Slave register 8
slv_reg8[(byte_index*8) +: 8] <= S_AXI_WDATA[(byte_index*8) +: 8];
end
5'h09:
for ( byte_index = 0; byte_index <= (C_S_AXI_DATA_WIDTH/8)-1; byte_index = byte_index+1 )
if ( S_AXI_WSTRB[byte_index] == 1 ) begin
// Respective byte enables are asserted as per write strobes
// Slave register 9
slv_reg9[(byte_index*8) +: 8] <= S_AXI_WDATA[(byte_index*8) +: 8];
end
5'h0A:
for ( byte_index = 0; byte_index <= (C_S_AXI_DATA_WIDTH/8)-1; byte_index = byte_index+1 )
if ( S_AXI_WSTRB[byte_index] == 1 ) begin
// Respective byte enables are asserted as per write strobes
// Slave register 10
slv_reg10[(byte_index*8) +: 8] <= S_AXI_WDATA[(byte_index*8) +: 8];
end
5'h0B:
for ( byte_index = 0; byte_index <= (C_S_AXI_DATA_WIDTH/8)-1; byte_index = byte_index+1 )
if ( S_AXI_WSTRB[byte_index] == 1 ) begin
// Respective byte enables are asserted as per write strobes
// Slave register 11
slv_reg11[(byte_index*8) +: 8] <= S_AXI_WDATA[(byte_index*8) +: 8];
end
5'h0C:
for ( byte_index = 0; byte_index <= (C_S_AXI_DATA_WIDTH/8)-1; byte_index = byte_index+1 )
if ( S_AXI_WSTRB[byte_index] == 1 ) begin
// Respective byte enables are asserted as per write strobes
// Slave register 12
slv_reg12[(byte_index*8) +: 8] <= S_AXI_WDATA[(byte_index*8) +: 8];
end
5'h0D:
for ( byte_index = 0; byte_index <= (C_S_AXI_DATA_WIDTH/8)-1; byte_index = byte_index+1 )
if ( S_AXI_WSTRB[byte_index] == 1 ) begin
// Respective byte enables are asserted as per write strobes
// Slave register 13
slv_reg13[(byte_index*8) +: 8] <= S_AXI_WDATA[(byte_index*8) +: 8];
end
5'h0E:
for ( byte_index = 0; byte_index <= (C_S_AXI_DATA_WIDTH/8)-1; byte_index = byte_index+1 )
if ( S_AXI_WSTRB[byte_index] == 1 ) begin
// Respective byte enables are asserted as per write strobes
// Slave register 14
slv_reg14[(byte_index*8) +: 8] <= S_AXI_WDATA[(byte_index*8) +: 8];
end
5'h0F:
for ( byte_index = 0; byte_index <= (C_S_AXI_DATA_WIDTH/8)-1; byte_index = byte_index+1 )
if ( S_AXI_WSTRB[byte_index] == 1 ) begin
// Respective byte enables are asserted as per write strobes
// Slave register 15
slv_reg15[(byte_index*8) +: 8] <= S_AXI_WDATA[(byte_index*8) +: 8];
end
5'h10:
for ( byte_index = 0; byte_index <= (C_S_AXI_DATA_WIDTH/8)-1; byte_index = byte_index+1 )
if ( S_AXI_WSTRB[byte_index] == 1 ) begin
// Respective byte enables are asserted as per write strobes
// Slave register 16
slv_reg16[(byte_index*8) +: 8] <= S_AXI_WDATA[(byte_index*8) +: 8];
end
5'h11:
for ( byte_index = 0; byte_index <= (C_S_AXI_DATA_WIDTH/8)-1; byte_index = byte_index+1 )
if ( S_AXI_WSTRB[byte_index] == 1 ) begin
// Respective byte enables are asserted as per write strobes
// Slave register 17
slv_reg17[(byte_index*8) +: 8] <= S_AXI_WDATA[(byte_index*8) +: 8];
end
5'h12:
for ( byte_index = 0; byte_index <= (C_S_AXI_DATA_WIDTH/8)-1; byte_index = byte_index+1 )
if ( S_AXI_WSTRB[byte_index] == 1 ) begin
// Respective byte enables are asserted as per write strobes
// Slave register 18
slv_reg18[(byte_index*8) +: 8] <= S_AXI_WDATA[(byte_index*8) +: 8];
end
5'h13:
for ( byte_index = 0; byte_index <= (C_S_AXI_DATA_WIDTH/8)-1; byte_index = byte_index+1 )
if ( S_AXI_WSTRB[byte_index] == 1 ) begin
// Respective byte enables are asserted as per write strobes
// Slave register 19
slv_reg19[(byte_index*8) +: 8] <= S_AXI_WDATA[(byte_index*8) +: 8];
end
5'h14:
for ( byte_index = 0; byte_index <= (C_S_AXI_DATA_WIDTH/8)-1; byte_index = byte_index+1 )
if ( S_AXI_WSTRB[byte_index] == 1 ) begin
// Respective byte enables are asserted as per write strobes
// Slave register 20
slv_reg20[(byte_index*8) +: 8] <= S_AXI_WDATA[(byte_index*8) +: 8];
end
5'h15:
for ( byte_index = 0; byte_index <= (C_S_AXI_DATA_WIDTH/8)-1; byte_index = byte_index+1 )
if ( S_AXI_WSTRB[byte_index] == 1 ) begin
// Respective byte enables are asserted as per write strobes
// Slave register 21
slv_reg21[(byte_index*8) +: 8] <= S_AXI_WDATA[(byte_index*8) +: 8];
end
5'h16:
for ( byte_index = 0; byte_index <= (C_S_AXI_DATA_WIDTH/8)-1; byte_index = byte_index+1 )
if ( S_AXI_WSTRB[byte_index] == 1 ) begin
// Respective byte enables are asserted as per write strobes
// Slave register 22
slv_reg22[(byte_index*8) +: 8] <= S_AXI_WDATA[(byte_index*8) +: 8];
end
5'h17:
for ( byte_index = 0; byte_index <= (C_S_AXI_DATA_WIDTH/8)-1; byte_index = byte_index+1 )
if ( S_AXI_WSTRB[byte_index] == 1 ) begin
// Respective byte enables are asserted as per write strobes
// Slave register 23
slv_reg23[(byte_index*8) +: 8] <= S_AXI_WDATA[(byte_index*8) +: 8];
end
default : begin
slv_reg0 <= slv_reg0;
slv_reg1 <= slv_reg1;
slv_reg2 <= slv_reg2;
slv_reg3 <= slv_reg3;
slv_reg4 <= slv_reg4;
slv_reg5 <= slv_reg5;
slv_reg6 <= slv_reg6;
slv_reg7 <= slv_reg7;
slv_reg8 <= slv_reg8;
slv_reg9 <= slv_reg9;
slv_reg10 <= slv_reg10;
slv_reg11 <= slv_reg11;
slv_reg12 <= slv_reg12;
slv_reg13 <= slv_reg13;
slv_reg14 <= slv_reg14;
slv_reg15 <= slv_reg15;
slv_reg16 <= slv_reg16;
slv_reg17 <= slv_reg17;
slv_reg18 <= slv_reg18;
slv_reg19 <= slv_reg19;
slv_reg20 <= slv_reg20;
slv_reg21 <= slv_reg21;
slv_reg22 <= slv_reg22;
slv_reg23 <= slv_reg23;
end
endcase
end
end
end
// Implement write response logic generation
// The write response and response valid signals are asserted by the slave
// when axi_wready, S_AXI_WVALID, axi_wready and S_AXI_WVALID are asserted.
// This marks the acceptance of address and indicates the status of
// write transaction.
always @( posedge S_AXI_ACLK )
begin
if ( S_AXI_ARESETN == 1'b0 )
begin
axi_bvalid <= 0;
axi_bresp <= 2'b0;
end
else
begin
if (axi_awready && S_AXI_AWVALID && ~axi_bvalid && axi_wready && S_AXI_WVALID)
begin
// indicates a valid write response is available
axi_bvalid <= 1'b1;
axi_bresp <= 2'b0; // 'OKAY' response
end // work error responses in future
else
begin
if (S_AXI_BREADY && axi_bvalid)
//check if bready is asserted while bvalid is high)
//(there is a possibility that bready is always asserted high)
begin
axi_bvalid <= 1'b0;
end
end
end
end
// Implement axi_arready generation
// axi_arready is asserted for one S_AXI_ACLK clock cycle when
// S_AXI_ARVALID is asserted. axi_awready is
// de-asserted when reset (active low) is asserted.
// The read address is also latched when S_AXI_ARVALID is
// asserted. axi_araddr is reset to zero on reset assertion.
always @( posedge S_AXI_ACLK )
begin
if ( S_AXI_ARESETN == 1'b0 )
begin
axi_arready <= 1'b0;
axi_araddr <= 32'b0;
end
else
begin
if (~axi_arready && S_AXI_ARVALID)
begin
// indicates that the slave has acceped the valid read address
axi_arready <= 1'b1;
// Read address latching
axi_araddr <= S_AXI_ARADDR;
end
else
begin
axi_arready <= 1'b0;
end
end
end
// Implement axi_arvalid generation
// axi_rvalid is asserted for one S_AXI_ACLK clock cycle when both
// S_AXI_ARVALID and axi_arready are asserted. The slave registers
// data are available on the axi_rdata bus at this instance. The
// assertion of axi_rvalid marks the validity of read data on the
// bus and axi_rresp indicates the status of read transaction.axi_rvalid
// is deasserted on reset (active low). axi_rresp and axi_rdata are
// cleared to zero on reset (active low).
always @( posedge S_AXI_ACLK )
begin
if ( S_AXI_ARESETN == 1'b0 )
begin
axi_rvalid <= 0;
axi_rresp <= 0;
end
else
begin
if (axi_arready && S_AXI_ARVALID && ~axi_rvalid)
begin
// Valid read data is available at the read data bus
axi_rvalid <= 1'b1;
axi_rresp <= 2'b0; // 'OKAY' response
end
else if (axi_rvalid && S_AXI_RREADY)
begin
// Read data is accepted by the master
axi_rvalid <= 1'b0;
end
end
end
// Implement memory mapped register select and read logic generation
// Slave register read enable is asserted when valid address is available
// and the slave is ready to accept the read address.
assign slv_reg_rden = axi_arready & S_AXI_ARVALID & ~axi_rvalid;
always @(*)
begin
// Address decoding for reading registers
case ( axi_araddr[ADDR_LSB+OPT_MEM_ADDR_BITS:ADDR_LSB] )
5'h00 : reg_data_out <= slv_reg0;
5'h01 : reg_data_out <= slv_reg1;
5'h02 : reg_data_out <= slv_reg2;
5'h03 : reg_data_out <= slv_reg3;
5'h04 : reg_data_out <= slv_reg4;
5'h05 : reg_data_out <= slv_reg5;
5'h06 : reg_data_out <= slv_reg6;
5'h07 : reg_data_out <= slv_reg7;
5'h08 : reg_data_out <= slv_reg8;
5'h09 : reg_data_out <= slv_reg9;
5'h0A : reg_data_out <= {31'd0,dma_start};
5'h0B : reg_data_out <= slv_reg11;
5'h0C : reg_data_out <= {8'd0,card_state6,card_state5,card_state4,card_state3,card_state2,card_state1};
5'h0D : reg_data_out <= slv_reg13;
5'h0E : reg_data_out <= slv_reg14;
5'h0F : reg_data_out <= slv_reg15;
5'h10 : reg_data_out <= slv_reg16;
5'h11 : reg_data_out <= slv_reg17;
5'h12 : reg_data_out <= slv_reg18;
5'h13 : reg_data_out <= slv_reg19;
5'h14 : reg_data_out <= slv_reg20;
5'h15 : reg_data_out <= slv_reg21;
5'h16 : reg_data_out <= slv_reg22;
5'h17 : reg_data_out <= slv_reg23;
default : reg_data_out <= 0;
endcase
end
// Output register or memory read data
always @( posedge S_AXI_ACLK )
begin
if ( S_AXI_ARESETN == 1'b0 )
begin
axi_rdata <= 0;
end
else
begin
// When there is a valid read address (S_AXI_ARVALID) with
// acceptance of read address by the slave (axi_arready),
// output the read dada
if (slv_reg_rden)
begin
axi_rdata <= reg_data_out; // register read data
end
end
end
// Add user logic here
assign sample_rate=slv_reg0;
assign total_sample_num=slv_reg1;
assign sample_num=slv_reg2;
assign channel_mask1=slv_reg3;
assign channel_mask2=slv_reg4;
assign channel_mask3=slv_reg5;
assign channel_mask4=slv_reg6;
assign channel_mask5=slv_reg7;
assign channel_mask6=slv_reg8;
assign sample_coef=slv_reg9[31:24];
assign job_id=slv_reg9[23:16];
assign stream_mode=slv_reg9[15:8];
assign led_lite=slv_reg9[0];
assign dest_ip=slv_reg11; //20250311 add
assign static_arp = slv_reg9[1];
assign static_dest_mac[47:24] = slv_reg13[23:0]; //20250912 add 注意mac地址为48位，而一个寄存器是32位，所以只能用两个寄存器来传
assign static_dest_mac[23:0] = slv_reg14[23:0];
// User logic ends
endmodule
FPGA/ip_repo/axi_lite_para24_1_0/xgui/axi_lite_para24_v1_0.tcl 0 → 100644
View file @ 61b62b1f
# Definitional proc to organize widgets for parameters.
proc init_gui { IPINST } {
ipgui::add_param $IPINST -name "Component_Name"
#Adding Page
set Page_0 [ipgui::add_page $IPINST -name "Page 0"]
ipgui::add_param $IPINST -name "C_S00_AXI_DATA_WIDTH" -parent ${Page_0} -widget comboBox
ipgui::add_param $IPINST -name "C_S00_AXI_ADDR_WIDTH" -parent ${Page_0}
ipgui::add_param $IPINST -name "C_S00_AXI_BASEADDR" -parent ${Page_0}
ipgui::add_param $IPINST -name "C_S00_AXI_HIGHADDR" -parent ${Page_0}
}
proc update_PARAM_VALUE.C_S00_AXI_DATA_WIDTH { PARAM_VALUE.C_S00_AXI_DATA_WIDTH } {
# Procedure called to update C_S00_AXI_DATA_WIDTH when any of the dependent parameters in the arguments change
}
proc validate_PARAM_VALUE.C_S00_AXI_DATA_WIDTH { PARAM_VALUE.C_S00_AXI_DATA_WIDTH } {
# Procedure called to validate C_S00_AXI_DATA_WIDTH
return true
}
proc update_PARAM_VALUE.C_S00_AXI_ADDR_WIDTH { PARAM_VALUE.C_S00_AXI_ADDR_WIDTH } {
# Procedure called to update C_S00_AXI_ADDR_WIDTH when any of the dependent parameters in the arguments change
}
proc validate_PARAM_VALUE.C_S00_AXI_ADDR_WIDTH { PARAM_VALUE.C_S00_AXI_ADDR_WIDTH } {
# Procedure called to validate C_S00_AXI_ADDR_WIDTH
return true
}
proc update_PARAM_VALUE.C_S00_AXI_BASEADDR { PARAM_VALUE.C_S00_AXI_BASEADDR } {
# Procedure called to update C_S00_AXI_BASEADDR when any of the dependent parameters in the arguments change
}
proc validate_PARAM_VALUE.C_S00_AXI_BASEADDR { PARAM_VALUE.C_S00_AXI_BASEADDR } {
# Procedure called to validate C_S00_AXI_BASEADDR
return true
}
proc update_PARAM_VALUE.C_S00_AXI_HIGHADDR { PARAM_VALUE.C_S00_AXI_HIGHADDR } {
# Procedure called to update C_S00_AXI_HIGHADDR when any of the dependent parameters in the arguments change
}
proc validate_PARAM_VALUE.C_S00_AXI_HIGHADDR { PARAM_VALUE.C_S00_AXI_HIGHADDR } {
# Procedure called to validate C_S00_AXI_HIGHADDR
return true
}
proc update_MODELPARAM_VALUE.C_S00_AXI_DATA_WIDTH { MODELPARAM_VALUE.C_S00_AXI_DATA_WIDTH PARAM_VALUE.C_S00_AXI_DATA_WIDTH } {
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
set_property value [get_property value ${PARAM_VALUE.C_S00_AXI_DATA_WIDTH}] ${MODELPARAM_VALUE.C_S00_AXI_DATA_WIDTH}
}
proc update_MODELPARAM_VALUE.C_S00_AXI_ADDR_WIDTH { MODELPARAM_VALUE.C_S00_AXI_ADDR_WIDTH PARAM_VALUE.C_S00_AXI_ADDR_WIDTH } {
# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
set_property value [get_property value ${PARAM_VALUE.C_S00_AXI_ADDR_WIDTH}] ${MODELPARAM_VALUE.C_S00_AXI_ADDR_WIDTH}
}
FPGA/readme.md 0 → 100644
View file @ 61b62b1f
# 说明
D-DAQ PL design文件夹是纯PL端的设计，只有采集，udp组包，发送功能
D-DAQ design文件夹是PL+PS端的设计，包括采集，udp组包，发生，dma传输到ps，nvme（pcie）等功能，其中用到了ip核，所以这里还附带了一个ip_repo，在另一台电脑使用这个工程时建议重新导入一下ip_repo里的ip核
然后D-DAQ_design_0911.zip是2025年9月11号更新的最新项目，内容和D-DAQ design是基本一致的，只是更新些内容（当前最新）
\ No newline at end of file
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment